Isopon P40 Glass Fibre - 1 Litre - P40/2
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Isopon P40 Glass Fibre for repairs on various materials. It offers a strong, watertight solution for filling and bonding. Keep in mind that proper surface preparation is crucial for optimal results.
All features
| Model Part Number | P40/2 |
|---|---|
| Brand | Isopon |
Extended Product Information
FAQs
What materials can I use Isopon P40 on?
You can use Isopon P40 on all metals (including galvanized steel), wood, concrete, ceramics, fiberglass, brick, and GRP.
How long does it take to set?
Isopon P40 sets quickly, typically within 20-30 minutes, depending on the temperature.
Can I paint over it?
Yes, once it has fully hardened, you can sand it and paint over it.
What should I do if the compound is too thick?
Add a small amount of the hardener to the mixture, but be careful not to overdo it.
How do I store the product?
Store in a cool, dry place. Make sure the container is sealed properly to prevent the compound from drying out.
What safety precautions should I take?
Wear gloves and eye protection when using this product. Work in a well-ventilated area.
Can I use it for structural repairs?
Yes, it is suitable for strong, watertight repairs and can be used to bond and fill a wide range of materials.
What is the shelf life of Isopon P40?
The shelf life is typically around 12 months when stored correctly.
Troubleshooting
Compound does not harden
Ensure the correct ratio of compound to hardener is used. Make sure the mixture is thoroughly mixed. Check the expiration date of the product.
Poor adhesion to the surface
Ensure the surface is properly prepared by cleaning, sanding, and drying before application.
Cracking after application
Apply in thin layers, allowing each layer to cure before applying the next. Avoid applying too much compound at once.
Pros and Cons
Pros
- Creates strong and durable repairs.
- Suitable for a wide range of materials.
- Provides watertight seals.
- Sets quickly, saving time.
- Easy to shape and paint after hardening.
Cons
- Requires proper surface preparation for optimal adhesion.
- Mixing the compound and hardener must be done correctly.
- May require multiple applications for deep repairs.
- Can be messy if not handled carefully.
Setup, Compatibility & Care
- Preparation: Clean the surface thoroughly, removing any rust, loose paint, or debris. Sand the area to create a good key for adhesion. Ensure the surface is dry.
- Mixing: Mix the Isopon P40 compound with the hardening solution according to the manufacturer's instructions. Ensure thorough mixing to activate the compound.
- Application: Apply the mixture to the prepared surface, filling any gaps or holes. Use a spatula or spreader to achieve the desired finish.
- Shaping: Once the compound has set, it can be shaped using sandpaper or a file. This allows for a smooth and even surface.
- Painting: After shaping, the repaired area can be painted to match the surrounding surface. Ensure the surface is clean and dry before applying paint.
Compatibility: This product is compatible with all metals (including galvanized steel), wood, concrete, ceramics, fiberglass, brick, and GRP.
Care: Store the product in a cool, dry place. Ensure the container is sealed when not in use to prevent the compound from drying out.