Granville Exhaust Assembly Paste - 500g
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps you understand and effectively use Granville Exhaust Assembly Paste. It's designed for anyone assembling or maintaining exhaust systems, providing a high-strength seal that can eliminate the need for welding. However, ensure proper surface preparation for optimal adhesion. This ready-to-use paste offers excellent early grab and rapid bond strength, withstanding temperatures exceeding 1200°C.
All features
| Model Part Number | 0434 |
|---|---|
| Brand | Granville |
Extended Product Information
FAQs
How long does it take for the paste to cure?
The paste typically cures within a few hours at room temperature, but full curing may take up to 24 hours. Heat from the engine accelerates curing.
Can this paste be used on all types of exhaust systems?
The paste is suitable for most exhaust systems. Always check for material compatibility before applying.
What temperature can this paste withstand?
This paste can withstand temperatures exceeding 1200°C.
How should I store the remaining paste after use?
Store the remaining paste in a cool, dry place with the container tightly sealed to prevent drying out.
Is the paste resistant to vibration?
Yes, this paste is designed to be shock and vibration resistant during service.
Can I remove the exhaust components later if needed?
Yes, the paste allows for easy dismantling of the exhaust for future maintenance.
What safety precautions should I take when using this product?
Wear gloves and eye protection during application. Avoid contact with skin and eyes. Ensure adequate ventilation during use.
Troubleshooting
Exhaust leak detected after assembly.
Check the joint for proper application and ensure a complete seal. Reapply paste if necessary. Check for cracks in the exhaust system.
Paste is not adhering properly.
Ensure surfaces were properly cleaned and free of rust or debris before application. Roughen the surface with sandpaper to improve adhesion. Ensure correct application procedure.
Paste is too thick to apply.
Ensure the paste is within its expiry date. If it's a bit thick, try working it a little before application. If it's excessively thick, it may have dried out and should be discarded.
The exhaust system is rattling.
Check all connections for tightness. Ensure the paste has fully cured and that all components are properly aligned. Retighten joints or reapply paste if needed.
Pros and Cons
Pros
- Eliminates the need for welding in many exhaust system applications.
- Provides a permanent, high-strength seal.
- Easy to apply and use.
- Resistant to high temperatures.
- Allows for easy disassembly for future maintenance.
- Safe and environmentally friendly formula.
Cons
- Requires proper surface preparation for optimal adhesion.
- May not be suitable for all types of exhaust systems.
- Bond strength depends on correct application.
- Thorough cleaning is needed before application.
- Can be messy if not applied carefully.
- Shelf life may be limited once opened.
Setup, Compatibility & Care
Setup
- Preparation: Ensure all surfaces are clean and free from rust, grease, and old sealant. Use a wire brush or abrasive cleaner.
- Application: Apply a continuous bead of the paste around the joint.
- Assembly: Connect the exhaust components, ensuring they fit tightly.
- Curing: Allow to air cure, or accelerate curing by running the engine.
Compatibility
This paste is compatible with various exhaust system materials, including steel and stainless steel. It is designed to work with most exhaust components.
Care
- Store in a cool, dry place.
- Keep the container sealed when not in use.
- Clean up any spills immediately.
- Avoid contact with skin and eyes; wear gloves and eye protection.