Briwax Liming Wax - 220g
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for woodworkers and DIY enthusiasts seeking to add a beautiful white-grained finish to their projects using Briwax Liming Wax. The key benefit is achieving a striking, textured effect, especially on open-grained timbers like oak. However, remember that the final look depends on the wood type and preparation. This guide will walk you through the product's features, usage, and care.
All features
| Model Part Number | BW7101000010 |
|---|---|
| Brand | Briwax |
Extended Product Information
FAQs
What is Briwax Liming Wax?
Briwax Liming Wax is a smooth white-tinted paste wax used to create a white-grained finish on open-grained timbers.
What kind of wood is this wax best suited for?
It is particularly effective on oak and similar open-grained timbers.
Can I use it on sealed surfaces?
Yes, you can apply it onto stained and sealed surfaces for an even effect.
How do I prepare the surface before applying?
Ensure the surface is clean, dry, and free from any previous finishes. Some woods will benefit from opening the grain with a wire brush.
Can I apply a clear coat over the liming wax?
Yes, you can overcoat it with Clear Briwax for a more durable finish.
How do I clean the waxed surface?
Use a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
What size is the Briwax Liming Wax?
The size of the Briwax Liming Wax is 220g.
Troubleshooting
Uneven application or blotchy finish.
Ensure the wax is applied evenly. If needed, apply thin coats and wipe off excess wax immediately.
White finish is too subtle.
Apply additional coats of Liming Wax or try opening the grain of the wood with a wire brush before applying.
Pros and Cons
Pros
- Creates a unique white-grained effect.
- Enhances the natural beauty of open-grained wood.
- Easy to apply and work with.
- Can be used on bare wood or sealed surfaces.
- Provides a durable finish when overcoated with Clear Briwax.
Cons
- Effectiveness varies depending on wood type.
- Requires proper surface preparation for optimal results.
- May require opening the grain with a wire brush for some wood types.
- Additional coats of Clear Briwax are needed for increased durability.
Setup, Compatibility & Care
Setup
- Ensure the surface is clean, dry, and free from any previous finishes.
- For some wood types, open the grain with a wire brush for better penetration.
Compatibility
- Works best on open-grained timbers like oak.
- Compatible with stained and sealed surfaces.
- Can be overcoated with Clear Briwax.
Care
- Clean with a soft, damp cloth.
- Avoid harsh chemicals or abrasive cleaners.
- Reapply as needed to maintain the finish.