Loctite Super Glue - Perfect Pen
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Loctite Super Glue Perfect Pen is for users needing precise, instant bonding for small repairs on various materials. Its key benefit is a mess-free, pen-like application for controlled glue dispensing. A potential caveat is its suitability for close-fitting breaks and small surfaces, rather than large or flexible areas.
All features
| Colour | Blue |
|---|---|
| Model Part Number | 2057737 |
| Brand | Loctite |
Extended Product Information
FAQs
How do I clean up spilled glue?
Wipe away any excess glue immediately with a dry cloth before it sets. For dried glue, carefully try to scrape it off or use a solvent like acetone, but always test on an inconspicuous area first to avoid damaging the surface.
Can this glue be used on flexible materials?
It works on rubber and fabric but is best suited for rigid materials and close-fitting breaks. For highly flexible applications, a different type of adhesive might be more appropriate.
What is the shelf life of the Loctite Super Glue Perfect Pen?
When stored correctly with the cap tightly on in a cool, dry place, the adhesive typically maintains its effectiveness for at least one year.
Is this glue suitable for outdoor use?
While it provides strong bonds, it is not specifically formulated for extreme outdoor conditions or prolonged exposure to moisture and UV rays. For such applications, consider a specialized outdoor adhesive.
Can I use this on electronics?
It is generally not recommended for use on sensitive electronic components due to potential residue and the risk of accidental short circuits if applied incorrectly.
How long does it take to fully cure?
The glue sets in seconds, providing handling strength quickly. However, full cure and maximum bond strength are typically achieved within 24 hours.
Troubleshooting
Glue not dispensing
Ensure the pen cap is removed and press firmly on the barrel. Check if the tip is blocked; if so, gently try to clear it with a pin.
Bond is weak or fails
Verify that surfaces were clean, dry, and free from oils or dust. Ensure sufficient pressure was applied during bonding and that the correct materials were being joined.
Excessive glue applied
Immediately wipe away excess with a dry cloth if possible before it sets. For dried excess, carefully scrape or use a suitable solvent (test on an inconspicuous area first).
Pen clogged after storage
Soak the tip in warm water for a few minutes to dissolve any dried adhesive, then gently clear with a pin.
Pros and Cons
Pros
- Highly accurate and controlled glue application.
- Gel formula prevents drips and messes.
- Fast-acting adhesive for quick fixes.
- Suitable for a variety of common household materials.
- Pen design makes it easy to handle and store.
Cons
- Best suited for small surfaces and close-fitting breaks.
- May not be ideal for large area bonding.
- Gel formula can be trickier to spread thinly on large areas compared to liquid glues.
- Requires careful handling due to its fast-setting nature.
Setup, Compatibility & Care
Setup: No specific setup is required. Ensure the surfaces to be bonded are clean, dry, and free from dust or grease. Remove the pen cap, press lightly on the pen barrel for controlled dispensing, and apply a small amount of adhesive to one surface. Press the surfaces together firmly for a few seconds until the bond sets.
Compatibility: This adhesive is effective on paper, cardboard, wood, chipboard, fabric, metal, rubber, and hard plastics. It is not recommended for use on polystyrene foam, polyethylene, or PTFE.
Care: Store the pen in a cool, dry place with the cap tightly secured to prevent clogging. The no-clog tap is designed to maintain performance over time with proper storage.