Shopping.co.uk

Yealink RCH40 - 4-Ports PoE+ Switch

Not AvailableYealink RCH40 - 4-Ports PoE+ Switch

The Yealink RCH40 is a Gigabit PoE+ Switch designed for Meeting Room Audio & Video Networking. It ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

TP-Link PowerLine Network Adapter Kit - TL-WPA4220 KIT V4From £40View product TP-Link Powerline Extender - AV1000 Gigabit, AC1200 Wi-Fi - TL-WPA7617 (UK)From £60View product Powerline Adapter Kit - TP-Link TL-PA7017P KIT (UK)From £50View product TP-Link G.hn2400 Powerline AX1800 Wi-Fi 6 Kit - PGW2440 KIT (UK)From £130View product

Product Information

Full details

The Yealink RCH40 Room Cable Hub is designed for users integrating audio and video devices into video conference systems, particularly in medium to large meeting rooms. Its key benefit is providing simplified connectivity and efficient power delivery for conference peripherals. A potential consideration is that its power budget may be a limiting factor for very high-power devices.

All features

Model Part NumberRCH40
BrandYealink

Extended Product Information

FAQs

What is the total PoE power budget of the Yealink RCH40?

The Yealink RCH40 has a total PoE power budget of up to 90W.

How many devices can I connect to the RCH40?

The RCH40 has four Gigabit Ethernet downlink ports for connecting devices.

What is Yealink EasyConnect?

Yealink EasyConnect allows for simplified connection of the RCH40 to Yealink VCH ports without requiring an additional power adapter for the RCH40 itself.

Does the RCH40 support standard PoE and PoE+?

Yes, it supports both IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standards.

What happens if the total power demand exceeds the 90W budget?

The Yealink SafeConnect feature will intelligently shut down lower-priority devices before higher-priority devices to maintain stability.

Can I use the RCH40 with non-Yealink devices?

Yes, the standard Gigabit Ethernet ports and PoE support ensure compatibility with most network and PoE-enabled devices, although specific Yealink features like EasyConnect are optimized for their ecosystem.

What type of cables should I use with the RCH40?

For optimal performance with Gigabit Ethernet speeds, Cat 5e or Cat 6 Ethernet cables are recommended.

Troubleshooting

Device not powering on

Verify the power source connected to the RCH40 is active and functioning correctly. Check the LED indicators for power status.

Connected devices not receiving power

Ensure the connected devices are PoE-compatible (802.3af/at). Check if the total power draw exceeds the 90W PoE budget. Lower-priority devices may be powered off by SafeConnect if the budget is exceeded.

No network connectivity

Confirm all Ethernet cables are securely connected at both ends. Check the uplink connection to your main network. Verify network configuration and IP addressing.

Intermittent connection drops

Inspect Ethernet cables for damage. Ensure connections are stable. Check for potential interference if using long cable runs.

Pros and Cons

Pros

  • Simplifies cable management in conference rooms.
  • Provides reliable power to connected AV devices via PoE+.
  • Supports high-speed Gigabit Ethernet connections.
  • Intelligent power management prevents overloading.
  • Easy integration with Yealink VCH systems.

Cons

  • Total PoE budget of 90W may not be sufficient for extremely power-hungry devices.
  • Limited to 4 downlink ports, which might be insufficient for very complex setups.
  • Primarily designed for Yealink ecosystems, integration with non-Yealink devices may vary.

Setup, Compatibility & Care

Setup:

  1. Connect the RCH40 to your network switch or router using its uplink Gigabit Ethernet port.
  2. Connect your Yealink audio and video devices (cameras, microphones, touch panels) to the four downlink Gigabit Ethernet ports.
  3. If connecting to a Yealink VCH port, utilize the Yealink EasyConnect feature for a simplified, adapter-free connection.
  4. Ensure your power source supports PoE+ (802.3at) or PoE (802.3af) for the connected devices.

Compatibility:

  • Compatible with devices supporting IEEE 802.3af and IEEE 802.3at PoE standards.
  • Optimized for Yealink video conferencing systems and peripherals, especially via the EasyConnect feature.
  • Standard Gigabit Ethernet ports ensure compatibility with most network devices.

Care:

  • Keep the device in a well-ventilated area to prevent overheating.
  • Clean the exterior with a dry or slightly damp soft cloth. Avoid harsh chemicals or abrasive cleaners.
  • Ensure the device is not exposed to moisture or extreme temperatures.