Gorilla Wood Glue - 236ml - 24 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Gorilla Wood Glue is a premium PVA adhesive engineered for professional woodworkers, hobbyists, and high-volume workshop environments seeking a reliable, high-strength bond. The key benefit is its fast-tack formulation that minimizes clamping time while providing a water-resistant joint that dries to a natural, inconspicuous tone, making it ideal for furniture assembly and intricate repair work. While it excels in both indoor and outdoor settings, users should note that as a PVA-based glue, it requires clean, well-fitting joints to achieve its maximum structural potential, as it is not designed for gap-filling applications.
All features
| Brand | Gorilla |
|---|
Extended Product Information
FAQs
Is this glue food safe?
Gorilla Wood Glue is not intended for direct food contact surfaces, such as cutting boards or salad bowls.
Can I use this for outdoor projects?
Yes, it is water-resistant, but it should not be submerged in water or used for items in constant, direct contact with standing water.
How long should I leave the clamps on?
For best results, leave the clamps on for at least 30 to 60 minutes, with full cure achieved in 24 hours.
Does this glue work on non-wood materials?
It is specifically formulated for wood-to-wood bonding and may not provide the same strength on plastic, metal, or stone.
What is the shelf life of the glue?
When stored correctly in a cool, dry environment, the glue typically has a shelf life of up to 12-24 months.
Can I paint over the dried glue?
Yes, once fully cured, the adhesive can be sanded and painted or stained to match the surrounding wood.
Troubleshooting
Glue is too thick to flow out of the bottle
Check if the glue has been exposed to cold temperatures. Warm the bottle slowly to room temperature; do not microwave.
Joint is not holding after clamping
Verify that the joint surfaces were not coated in dust or finish, and ensure sufficient clamping pressure was applied while the glue was wet.
Visible white residue after drying
This is likely excess glue that was not wiped away properly. Use a damp cloth to clean squeeze-out immediately after clamping.
Pros and Cons
Pros
- Dries to a natural, professional wood tone
- Excellent water resistance for versatile use
- Fast drying and tack time improves workshop efficiency
- Highly reliable bond strength for structural woodworking
- Convenient bottle size for controlled application
Cons
- Not intended for filling large gaps in loose-fitting joints
- Requires careful storage to prevent freezing or spoilage
- Not suitable for load-bearing joints requiring specific structural certification
Setup, Compatibility & Care
For best results, surfaces to be bonded must be clean, dry, and tight-fitting.
- Preparation: Sand the wood surfaces lightly if they are glazed or sealed.
- Application: Apply the glue to one side of the wood. Spread evenly to ensure total coverage.
- Clamping: Clamp the wood pieces firmly. Ensure pressure is applied evenly across the entire surface.
- Cleanup: Wipe away any excess "squeeze-out" with a damp cloth before the glue dries.
Store the 236ml bottles in a cool, dry place away from direct sunlight and prevent them from freezing, as extreme temperatures can compromise the PVA chemistry. Always ensure the cap is tightly sealed after every use to prevent the adhesive from skinning.