Dina Wakley Media Cell Creator - Ranger - MDA63278
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for artists and crafters looking to create unique visual effects in acrylic pours. The Dina Wakley Media Cell Creator, when used with Pouring Medium and acrylic paints, helps generate isolated color variations, commonly known as 'cells,' in your poured artwork. A key benefit is its ability to enhance the visual complexity of pours without requiring specialized equipment. However, users should be aware that achieving consistent cell formation may require experimentation with paint-to-medium ratios.
All features
| Model Part Number | MDA63278 |
|---|---|
| Brand | Ranger |
Extended Product Information
FAQs
What is the primary function of the Dina Wakley Media Cell Creator?
The Cell Creator is designed to alter the density of your paint mixture, which helps in creating isolated color variations, known as 'cells,' within acrylic pours.
Can I use the Cell Creator with any acrylic paint?
It is designed to work best with Dina Wakley Media Acrylic Paints and Pouring Medium. While it may work with other brands, results can vary significantly depending on the paint formulation.
How much Cell Creator should I use?
A good starting point is 1-2 teaspoons of Cell Creator per 4 oz of the combined paint and pouring medium mixture. However, the exact amount needed to achieve desired cell effects will require experimentation.
What kind of finish does the poured artwork have?
The poured artwork dries to a satin finish that is resistant to cracking, allowing you to write, stamp, or draw on it.
What surfaces can I pour on using this medium?
You can pour over various surfaces such as Media Board, journal pages, wood panels, and canvas.
Do I need to use a torch with the Cell Creator?
A torch is not strictly required for cell formation with the Cell Creator, but it can be used carefully to help pop surface bubbles. The Cell Creator itself facilitates the chemical reaction that creates cells.
How do I clean up after using the Cell Creator?
Clean up any wet paint and medium mixtures immediately with soap and water. Dried acrylics may require more effort to remove.
Troubleshooting
No cells are forming.
Ensure you are using the Cell Creator in conjunction with Pouring Medium and acrylic paints. Adjust the ratio of Cell Creator to paint/medium, or try a different brand of acrylic paint as compatibility can vary. Stirring too vigorously can also prevent cell formation; stir gently.
Cells are too large or too small.
Experiment with the amount of Cell Creator used. More Cell Creator may lead to smaller, more numerous cells, while less may result in larger, sparser cells. Also, consider the viscosity of your paint mixture; thicker mixtures might produce different cell sizes.
Paint mixture is too thick or too thin.
Adjust the ratio of Pouring Medium to acrylic paint. Add more Pouring Medium for a thinner consistency, or more paint (or a bit of water, cautiously) for a thicker consistency. The Cell Creator works best within a specific viscosity range.
The surface cracks after drying.
While the medium is designed to be non-crackling, extreme environmental conditions or very thick pours on inflexible surfaces could potentially cause issues. Ensure your pour is not excessively thick and allow it to dry in a stable environment.
Bubbles are trapped in the pour.
Avoid over-stirring the mixture. You can also try using a kitchen torch briefly over the surface (from a safe distance) to pop surface bubbles. The Cell Creator itself should not hold bubbles.
Pros and Cons
Pros
- Facilitates the creation of striking cell and marble effects in acrylic pours.
- Enhances the visual depth and complexity of poured art.
- Dries to a durable, non-crackling satin finish.
- Compatible with various artistic surfaces.
- Provides a unique surface for further artistic exploration after drying.
Cons
- Requires experimentation to achieve desired cell patterns.
- Best used with Dina Wakley Media Pouring Medium for optimal results.
- Results can vary based on paint consistency and application technique.
- Small container size (1 oz) may be limiting for large projects.
- Primarily designed for acrylic pours, less effective with other mediums.
Setup, Compatibility & Care
Setup:
- Ensure your work area is protected with a drop cloth or plastic sheeting, as acrylic pours can be messy.
- Prepare your surface (canvas, wood panel, Media Board, etc.) for pouring.
- In a separate cup, mix Dina Wakley Media Acrylic Paint with Dina Wakley Media Pouring Medium according to your desired consistency. Start with a ratio of 1:1 paint to medium and adjust as needed.
- Add the Dina Wakley Media Cell Creator to the paint and medium mixture. A common starting point is 1-2 teaspoons of Cell Creator per 4 oz of paint/medium mixture, but this can be adjusted for different effects.
- Stir gently to combine, avoiding excessive air bubbles.
- Pour the mixture onto your prepared surface and tilt to spread.
Compatibility:
- Primary Use: Compatible with Dina Wakley Media Acrylic Paints and Dina Wakley Media Pouring Medium.
- Surfaces: Works on Media Board, journal pages, wood panels, canvas, and other porous art surfaces.
- Post-Pouring: The dried surface is suitable for writing, stamping, and drawing with various art mediums.
Care:
- Once dry, the poured surface is durable and resistant to cracking.
- Clean up wet materials immediately with soap and water.
- Dried acrylics can be removed from surfaces using appropriate solvents if necessary, though it is generally permanent.
- Store the Cell Creator in its original container in a cool, dry place away from direct sunlight.