Motip Electro Protect - 500ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to protect electrical components from moisture and corrosion using Motip Electro Protect. The key benefit is its ability to prevent starting problems and extend the life of electrical systems. However, ensure proper application and ventilation during use. This product is a water-repellent, moisture-repellent, and pH-neutral electro preservative suitable for batteries, cables, spark plugs, and more. It offers excellent adhesion and corrosion prevention.
All features
| Model Part Number | 090108 |
|---|---|
| Brand | Motip |
Extended Product Information
FAQs
What is Motip Electro Protect?
It is an electro preservative designed to protect electrical components from moisture and corrosion.
What can I use it on?
It is suitable for use on batteries, multiple sockets, cables, spark plugs, printed circuit boards, and other electrical systems.
How do I apply it?
Clean and dry the surface. Shake the can well, and spray evenly from 20-30 cm away.
How long does it take to dry?
Drying time varies depending on conditions, but usually a few minutes.
Is it safe for plastics?
Yes, it is generally compatible with plastics, but testing on a small area is recommended.
What should I do if the nozzle clogs?
Clean the nozzle with a suitable solvent.
Where should I store the product?
Store in a cool, dry place away from direct sunlight.
What is the pH level of the product?
It is pH-neutral.
Troubleshooting
Product is not spraying.
Check the nozzle for blockages. Clean with a suitable solvent if necessary. Ensure the can is shaken well before use.
Product is running or dripping.
Apply in thin, even coats. Avoid applying too much product at once. Allow each coat to dry before applying another.
Product does not seem to be protecting against corrosion.
Ensure the surface was thoroughly cleaned before application. Reapply if necessary. Check for complete coverage.
Pros and Cons
Pros
- Prevents starting problems caused by moisture.
- Protects against corrosion, extending the lifespan of electrical components.
- Easy to apply with good penetrating properties.
- Suitable for a wide range of applications, from batteries to circuit boards.
- Resistant to water, salt, weak acids, and bases.
Cons
- Requires proper ventilation during application.
- May require multiple coats for optimal protection in certain environments.
- Not effective if applied over existing corrosion (must be cleaned first).
- Contains chemicals; should be handled with care.
Setup, Compatibility & Care
- Preparation: Ensure the electrical components are clean and dry before application. Remove any loose rust or debris.
- Application: Shake the can well before use. Apply an even coat of Motip Electro Protect from a distance of approximately 20-30 cm.
- Drying: Allow the product to dry completely. Drying time may vary depending on environmental conditions (typically a few minutes).
- Compatibility: Motip Electro Protect is compatible with a wide range of materials, including plastics and metals. However, it's always recommended to test on a small, inconspicuous area first.
- Care: Store the product in a cool, dry place. Avoid direct sunlight. After use, invert the can and spray to clear the nozzle. Dispose of the empty can according to local regulations.