Liberon Finishing Oil - 500ml
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is designed for anyone looking to enhance and protect their interior wood surfaces, from kitchen worktops to wooden toys, using Liberon Finishing Oil. The primary benefit is a durable, water-resistant finish that beautifully enhances the natural color of the wood. Keep in mind that the final sheen (matte, satin, or gloss) depends on the number of coats applied. This versatile oil is suitable for a wide range of surfaces including wood, cork, stone, and terracotta. It is also EN71 approved, which means it is safe for use on children's toys.
All features
| Model Part Number | 003819 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
How many coats of Liberon Finishing Oil should I apply?
The number of coats depends on the desired finish. For a matte finish, two coats may be sufficient. For a glossier and more durable finish, apply three or more coats.
Can I use Liberon Finishing Oil on exterior wood?
No, this product is designed for interior use only.
What should I do if I spill Liberon Finishing Oil?
Wipe up spills immediately with a clean cloth to prevent staining and damage to the surface.
How do I clean a surface treated with Liberon Finishing Oil?
Clean the surface with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that can damage the finish.
Is Liberon Finishing Oil safe for use around food?
Yes, once fully cured, Liberon Finishing Oil is food-safe and ideal for kitchen applications.
What is the coverage rate of Liberon Finishing Oil?
The coverage rate is approximately 10-12 square meters per liter, but this can vary depending on the wood type and application method.
Can I apply Liberon Finishing Oil over an existing finish?
No, it is best to apply Liberon Finishing Oil to bare wood or surfaces that have been properly prepared.
What safety precautions should I take when using this product?
Ensure adequate ventilation during application. Avoid contact with skin and eyes. Keep out of reach of children.
Troubleshooting
Oil is not drying properly.
Ensure adequate ventilation and allow sufficient drying time between coats. Make sure the room temperature is within the recommended range.
Finish is uneven.
Apply a thinner coat and ensure even distribution. Sand lightly between coats to smooth out imperfections.
Surface feels sticky after drying.
Wipe off any excess oil with a clean cloth. Apply a thin coat and allow to dry completely.
Pros and Cons
Pros
- Enhances and protects a variety of wood surfaces.
- Provides a durable and water-resistant finish.
- Available in multiple finishes (matte, satin, gloss).
- Quick drying time.
- Safe for use on children's toys (EN71 approved).
Cons
- Requires multiple coats for desired finish.
- Surface preparation is essential for best results.
- May require ventilation during application.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from any previous finishes or contaminants. Sand the wood smooth and remove all dust.
- Application: Apply a thin, even coat of Liberon Finishing Oil using a brush or a lint-free cloth. Work in the direction of the wood grain.
- Drying Time: Allow the oil to dry for approximately 5 hours between coats. The drying time may vary depending on environmental conditions.
- Number of Coats: Apply multiple coats to achieve the desired finish and level of protection. The more coats, the more durable and glossy the finish will be.
- Compatibility: Liberon Finishing Oil is compatible with all types of bare wood, cork, stone, and terracotta.
- Care: Clean the finished surface with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
