Living and Home 3D Wall Panel Decorative Wallpaper - 12 Pcs - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Living and Home 3D Wall Panels are designed for homeowners, interior designers, and DIY enthusiasts looking to add architectural depth and modern texture to their walls. These panels provide a high-impact, fire-resistant aesthetic upgrade for both residential and commercial settings, though users should be prepared for the precision required during the adhesive installation process to achieve a seamless, professional finish.
All features
| Model Part Number | 0744052931454 |
|---|---|
| Brand | Living and Home |
Extended Product Information
FAQs
Can these panels be used in bathrooms?
While they are durable, they are not waterproof. Use caution in areas with high humidity or direct water contact.
What tools are needed for installation?
You will need a measuring tape, a level, a utility knife for cutting, and a high-quality construction adhesive.
Can I paint the panels?
Yes, the material is generally compatible with standard water-based paints.
Are they easy to remove?
Removal may damage the drywall surface underneath due to the strong construction adhesive required for a permanent hold.
Can they be installed on ceilings?
They can, but ensure you use an adhesive rated for overhead weight and potentially add mechanical fasteners for safety.
Troubleshooting
Panels are peeling at the edges
Ensure the wall was properly primed before application and that the correct construction adhesive was applied to the entire back surface of the panel.
Visible seams between panels
Use a paintable caulk or filler to bridge the gaps before painting over the entire installation for a monolithic look.
Pros and Cons
Pros
- Durable and fire-resistant composition
- Suitable for indoor and outdoor use
- Creates a high-end, modern architectural look
- Lightweight and relatively easy to handle
- Compatible with creative lighting installations
Cons
- Requires careful planning for pattern alignment
- Adhesive needs to be purchased separately
- Cutting individual panels requires precise tools
- Not intended for textured or damp wall surfaces
Setup, Compatibility & Care
Before installation, ensure the wall surface is clean, dry, and free of dust. You will need a heavy-duty construction adhesive suitable for wall panels and a utility knife or fine-tooth saw for trimming.
- Measure the wall area and plan your layout before applying adhesive.
- Apply the adhesive to the back of the panel following the manufacturer's instructions for the specific glue used.
- Press firmly onto the wall, starting from a bottom corner and working upward.
- If using lighting, install your LED strips or wall sconces before finalizing the panel edges.
For ongoing care, simply dust the panels with a microfiber cloth or use a vacuum with a soft brush attachment. If the surface becomes stained, a damp cloth with mild soap is usually sufficient, but avoid abrasive chemicals that might degrade the finish.