Tuda Grass Direct Acoustic Wood Wall Panel End Bar Piece Trim Series 1 - 240cm - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for installers and DIY enthusiasts looking to achieve a professional finish on their Tuda Grass Direct Acoustic Wood Wall Panels Series 1. The end bar piece trim provides a cohesive, solid wood-edge appearance, completing the aesthetic of your panel installation. A potential caveat is that it is designed specifically for Series 1 panels, ensuring a perfect fit and look.
All features
| Model Part Number | awp_trim_s1_240cm_grey |
|---|---|
| Brand | Tuda Grass Direct |
Extended Product Information
FAQs
What acoustic wood wall panels is this end bar trim compatible with?
This End Bar Piece Trim is specifically designed for the Tuda Grass Direct Acoustic Wood Wall Panels Series 1, particularly the 240x60cm panels.
How many colors are available for this trim?
This specific trim is in Grey. The End Pieces, which this trim completes the look of, are available in 6 colors: Grey, Black, Washed Oak, Walnut, Smoke Oak, and Oak.
What is the primary purpose of this end bar piece trim?
The primary purpose is to provide a clean, solid wood-edge finish to the ends of your acoustic wood wall panels, enhancing the overall aesthetic and completing the installation.
Can this trim be cut to size for shorter panels?
Yes, the trim can be cut to your desired length using a fine-toothed saw for a precise fit on shorter panel applications.
What is the weight of the trim?
The trim weighs approximately 2.094391489 pounds.
How should I clean the trim?
Clean the trim with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals to protect the veneered surface.
Does this trim come with adhesive?
Adhesive is not included with the trim. You will need to use a suitable construction adhesive or panel adhesive for installation.
Troubleshooting
Trim does not align flush with the panel.
Ensure both the panel edge and the trim are clean and free from debris. Reapply adhesive, ensuring precise alignment before it sets. Check if the panel is installed perfectly vertically or horizontally.
Adhesive is not holding the trim securely.
Verify that the correct type of adhesive for wood and wall paneling is being used and that it is applied evenly. Ensure the surfaces are properly prepared (clean and dry). Allow adequate curing time for the adhesive.
Veneered surface is scratched or damaged.
Handle the trim carefully during installation. For minor scratches, a wood repair crayon or touch-up pen in a matching color might be effective. Avoid using abrasive cleaning materials.
Cut edge of the trim looks rough.
Use a fine-toothed saw and a cutting guide for the cleanest possible cut. Sand the cut edge lightly with fine-grit sandpaper if necessary for a smoother finish before application.
Pros and Cons
Pros
- Provides a professional, finished look to panel installations.
- Ensures a seamless transition and clean edge on panel ends.
- Specifically designed for a perfect fit with Series 1 acoustic panels.
- Enhances the overall aesthetic of the acoustic wall panel system.
- Offers a durable and solid edge treatment.
Cons
- Limited to Tuda Grass Direct Acoustic Wood Wall Panels Series 1.
- Only available in a 240cm length, requiring cuts for shorter panels.
- Color options are tied to the panel colors, limiting customisation if a mismatch is desired.
- May require precise alignment during installation for the best aesthetic outcome.
Setup, Compatibility & Care Instructions
Compatibility: This End Bar Piece Trim is specifically designed for use with Tuda Grass Direct Acoustic Wood Wall Panels Series 1, particularly the 240x60cm size. Ensure your panels are from the Series 1 range for a guaranteed fit.
Setup:
- Measure and cut the End Bar Piece Trim to the required length if necessary. Use a fine-toothed saw for clean cuts.
- Apply a suitable adhesive (e.g., construction adhesive or panel adhesive) to the back of the trim or the edge of the acoustic panel.
- Carefully align the trim with the edge of the acoustic panel, ensuring the veneered surfaces face outwards and create a flush line.
- Press firmly and hold in place, or use temporary securing methods like painter's tape, until the adhesive sets.
- Allow the adhesive to cure fully according to the manufacturer's instructions before handling or cleaning.
Care:
- Wipe clean with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the veneered surface.
- For tougher marks, a mild soap solution can be used, followed by a wipe with a clean, damp cloth.
- Ensure the area is dried thoroughly after cleaning.