Isopon P40 Glass Fibre - 1.85 Litres
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the Isopon P40 Glass Fibre bridging compound, designed for strong and watertight repairs on various materials. It offers a quick-setting, durable solution for filling and bonding. However, it's essential to follow the mixing instructions carefully for optimal results.
All features
| Model Part Number | P40/4 |
|---|---|
| Brand | Isopon |
Extended Product Information
FAQs
How much hardener should I use?
Always follow the manufacturer's instructions on the packaging for the correct ratio of compound to hardener. Incorrect mixing can affect the curing process.
Can I use this on plastic?
The product is suitable for a wide range of materials, but not all types of plastic. Always check the product's compatibility before application.
How long does it take to set?
The setting time varies depending on the temperature and the amount of hardener used. Refer to the product instructions for the expected setting time.
How do I clean the tools after use?
Clean tools immediately after use with a suitable solvent, such as acetone or a paint thinner, before the compound hardens.
Can I paint over the compound?
Yes, once the compound is fully cured and shaped, it can be painted. Ensure you use a suitable primer for the paint you intend to use.
What is the shelf life of the product?
The shelf life is typically indicated on the packaging. Store the product properly to extend its shelf life.
Is it waterproof?
Yes, the Isopon P40 Glass Fibre compound provides a strong, watertight seal.
Troubleshooting
Compound does not harden.
Ensure the correct ratio of compound to hardener was used. Check the expiration date of the product.
Compound is too difficult to shape.
Allow the compound to set slightly longer before attempting to shape it. Use appropriate tools for shaping.
Poor adhesion to the surface.
Ensure the surface was properly prepared (clean, dry, and free from contaminants).
Pros and Cons
Pros
- Creates strong, watertight repairs.
- Sets quickly, saving time.
- Versatile use on different materials.
- Reinforced with glass fibre for added strength.
- Easy to shape after setting.
Cons
- Requires careful mixing of the compound and hardener.
- May require multiple applications for deep repairs.
- Not suitable for all types of plastics.
- Can be messy if not handled properly.
Setup, Compatibility & Care
- Preparation: Ensure the surface is clean, dry, and free from loose particles, rust, or paint.
- Mixing: Mix the compound thoroughly with the hardening solution provided, following the manufacturer's instructions. Incorrect mixing can affect the curing process.
- Application: Apply the mixed compound to the damaged area, filling the gaps or cracks.
- Shaping: Once the compound has set, shape it using appropriate tools to achieve the desired finish.
- Compatibility: This product is compatible with metals (including galvanised steel), wood, concrete, ceramics, fibreglass, brick, and GRP.
- Care: Store in a cool, dry place away from direct sunlight. Ensure the container is sealed properly after use. Clean tools immediately after use to prevent the compound from hardening on them.