Ideal Industries In-Line Push-In Wire Connectors - Polycarbonate
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for electricians, contractors, and DIY enthusiasts looking for a fast and reliable way to connect wires. The Ideal Industries In-Line Push-In Wire Connectors offer a crimp-free, solderless solution, saving you time and effort on the job. Keep in mind that these connectors are designed for specific wire gauges, so ensure compatibility before use.
All features
| Model Part Number | Ideal Industries In-Line Push-In Wire Connectors |
|---|---|
| Brand | IDEAL |
Extended Product Information
FAQs
What wire types are compatible with these connectors?
These connectors are compatible with solid wires from 0.5mm² to 4.0mm² and stranded wires from 1.0mm² to 2.5mm².
What is the voltage rating of these connectors?
The connectors are rated for 450V.
Can these connectors be reused?
No, these connectors are designed for a single use and are not reusable.
How do I ensure a good connection?
Make sure the wire is stripped to the correct length, fully inserted, and that the transparent window shows proper contact.
Are these connectors compliant with any standards?
Yes, they are BS 7671:2008 (17th Edition) compliant.
What is the maximum current rating?
The connectors are rated for 32A.
Where can I use these connectors?
These connectors are suitable for various applications, including pre-fab wiring, lighting circuits, and ring main circuits.
How long does it take to connect a wire?
It takes less than 10 seconds to join two wires together.
Troubleshooting
Connector won't accept the wire.
Ensure the wire is stripped to the correct length and that the wire gauge is compatible with the connector. Make sure the wire end is straight, and not frayed.
Poor connection or intermittent electrical contact.
Make sure the wire is fully inserted into the connector. Check the transparent window to ensure proper contact.
Connector is difficult to remove or disconnect.
There is no way to remove this type of connector without destroying the connection. Cut the wire on both ends of the connector.
Pros and Cons
Pros
- Saves time compared to traditional butt splices.
- Eliminates the need for crimping tools.
- Provides a secure and reliable connection.
- Suitable for both solid and stranded wires.
- Transparent window allows for visual inspection.
- Compliant with relevant safety standards.
Cons
- Limited to specific wire gauges.
- Requires proper insertion to ensure a secure connection.
- May not be suitable for all types of electrical applications.
- Cannot be reused after removal.
Setup, Compatibility & Care
- Preparation: Strip the wire to the appropriate length as indicated on the connector.
- Insertion: Insert the stripped wire into the connector until it is fully seated. Ensure the wire is pushed in firmly.
- Inspection: Check the transparent window to ensure the wire is properly connected.
Compatibility:
- Solid Wires: 0.5mm² - 4.0mm²
- Stranded Wires: 1.0mm² - 2.5mm²
- Voltage: 450V
- Current: 32A
Care:
- Always disconnect power before working with electrical wires.
- Ensure the wire gauge is compatible with the connector.
- Do not exceed the voltage and current ratings.
- Regularly inspect connections for any signs of damage or loosening.