Bartoline Boiled Linseed Oil - 5L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and homeowners looking to protect and enhance soft wood garden furniture. Bartoline Boiled Linseed Oil offers a natural sheen and protection against sun damage, with additives for accelerated drying. A caveat for users is that it is not recommended for hardwoods like Oak and Teak, for which Teak Oil is preferred. Key features include wood treatment, sun damage protection, and a natural sheen.
All features
| Model Part Number | 3X |
|---|---|
| Brand | Bartoline |
Extended Product Information
FAQs
What type of wood is Bartoline Boiled Linseed Oil best for?
It is ideal for treating soft woods such as pine, fir, and cedar. It is not recommended for hardwoods like Oak and Teak.
How long does it take for the oil to dry between coats?
You should allow a minimum of 24 hours drying time between each application for optimal results.
What is the fire risk with used cloths?
Used cloths stained with linseed oil can spontaneously combust. Immediately after use, wash them thoroughly with soapy water and dry them flat outdoors away from ignition sources before disposal.
Can I use this on interior wood?
While it can be used on interior wood, it is primarily designed for outdoor soft wood furniture. For interior wood, consider finishes that offer different aesthetic or protective qualities.
How should I clean my brushes after use?
Clean application brushes and tools immediately after use with White Spirit.
What preparation is needed before applying the oil?
The surface must be clean, dry, and free from grease, dirt, old paint, or stain. Sanding and cleaning with White Spirit may be required. Treat mildew with Fungicidal Wash.
What happens if I don't wipe off the excess oil?
If excess oil is not wiped off after 15-20 minutes, the surface may remain sticky and take longer to dry, potentially leading to an uneven finish.
Troubleshooting
Wood surface remains sticky after application
Too much oil was applied and not enough excess was wiped off. Apply a clean cloth to absorb the remaining sticky oil. Allow more time for drying in a well-ventilated area.
Uneven finish or blotchiness
The wood may have absorbed the oil unevenly. Apply a thin, even coat and ensure all excess is wiped off promptly. Lightly re-sanding and reapplying may be necessary for severe cases.
Oil does not seem to be drying
Ensure you are applying to dry wood and that the ambient temperature and humidity are suitable for drying. Avoid applying in very cold or damp conditions. Ensure correct product (Boiled Linseed Oil) is being used, not Raw Linseed Oil which dries much slower.
Wood still looks dry or lacks sheen
A second or third coat may be required. Ensure the previous coat was fully dry before applying the next. Apply more generously and ensure all excess is wiped off for a better sheen.
Pros and Cons
Pros
- Effectively protects soft woods from sun damage.
- Enhances wood with a natural, attractive sheen.
- Faster drying time due to added accelerators.
- Simple application process with common tools.
- Suitable for a variety of outdoor wooden items.
Cons
- Not suitable for hardwoods like Oak and Teak.
- Used cloths can pose a fire risk if not handled properly.
- Requires 24 hours drying time between coats.
- May not offer the same level of protection as specialized varnishes or sealants.
- Requires cleaning of equipment with White Spirit.
Setup, Compatibility & Care Instructions
Preparation
- Ensure the wood surface is clean, dry, and free from dust, grease, and dirt.
- Sand away any old paint or stain. For stubborn residues, a solvent like White Spirit can be used.
- Treat any existing mildew with a Fungicidal Wash before application.
Application
- Apply generously using a clean, soft cloth or brush.
- Rub the oil well into the wood grain.
- Remove any excess oil that has not soaked into the wood after 15-20 minutes.
- For best results, apply 2 to 3 coats, allowing a minimum of 24 hours drying time between each application.
Compatibility
- Ideal for soft woods such as pine, fir, and cedar.
- Not recommended for hardwoods like Oak or Teak. Use a dedicated Teak Oil for these woods.
Care & Cleanup
- Clean application tools (brushes, cloths) thoroughly with White Spirit.
- Fire Hazard Warning: Used cloths impregnated with linseed oil can spontaneously combust. Immediately after use, wash all cloths thoroughly with soapy water and then spread them out flat outdoors to dry completely before disposal. Do not pile them up.