Connect Straight Fuel Line Quick Connectors - 18 x 15mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for mechanics and DIY enthusiasts working with fuel lines. The Connect Straight Fuel Line Quick Connectors offer a secure and reliable way to join 15mm ID nylon pipe and rubber hoses, simplifying fuel system maintenance and repairs. A potential consideration is ensuring compatibility with specific fuel types, as AdBlue connectors have distinct red tabs.
All features
| Model Part Number | 34238 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
What size hose does this connector fit?
These connectors are designed for hoses and pipes with a 15mm inner diameter (ID).
Can I use these connectors for AdBlue?
No, these connectors have grey tabs and are intended for standard fuel. AdBlue specific connectors have red tabs.
What is the maximum pressure these connectors can handle?
They are rated for a constant running pressure of 5 bar (72 psi) and a maximum pressure of 7 bar (101 psi).
What materials are the connectors made from?
The body is manufactured from Nylon PA12, and the O-ring seal is made from FKM (Viton).
How do I disconnect the fuel line?
To disconnect, simultaneously press the grey release tabs on both sides of the connector and pull the hose or pipe away.
What is the operating temperature range?
These connectors can operate reliably in temperatures ranging from -40°C to 120°C.
Are these connectors reusable?
Yes, provided they are inspected for damage and the O-rings are in good condition, they can be reused.
Troubleshooting
Connector won't click into place
Ensure the hose/pipe is fully inserted to the correct depth and the inner diameter is 15mm. Check for obstructions inside the hose end or on the connector nipple.
Leaking connection
Verify the O-ring is seated correctly and free from damage. Ensure the connection is fully engaged by listening for the click. Check that the hose/pipe is not damaged at the connection point.
Difficulty releasing the connector
Press the grey release tabs firmly and simultaneously. Ensure no debris is obstructing the tabs. Try gently wiggling the hose while pressing the tabs.
Connector cracked or damaged
Do not use a damaged connector. Replace immediately with a new one to ensure a safe and reliable fuel system.
Pros and Cons
Pros
- Ensures a leak-free connection for fuel systems.
- Durable materials suitable for automotive environments.
- Wide temperature and pressure rating for versatility.
- Easy push-to-connect and release mechanism.
- Clearly marked for standard fuel use, avoiding mix-ups.
Cons
- Specific to 15mm inner diameter connections only.
- Requires careful alignment to ensure a proper seal.
- Not designed for high-pressure fuel injection systems beyond stated limits.
- Grey tab is for identification; visually confirm compatibility if unsure.
Setup, Compatibility & Care
Setup:
- Ensure the ends of both the nylon pipe and rubber hose are clean and free from debris.
- Verify the inner diameter of the hose and pipe is exactly 15mm.
- Push the connector firmly onto the respective fuel line until a distinct click is heard, indicating secure engagement.
- To disconnect, press the grey release tabs on either side of the connector simultaneously and pull the hose/pipe away.
Compatibility:
- Suits 15mm inner diameter (ID) nylon pipe and rubber hose.
- Compatible with standard fuel types. Note: AdBlue specific connectors have red tabs; these grey tab connectors are for standard fuel.
- Meets SAE J2044-220908 standards.
Care:
- Inspect O-rings for damage or wear before each connection.
- Clean the connector ends and hose fittings with a lint-free cloth before use.
- Store in a clean, dry area away from direct sunlight and harsh chemicals when not in use.
- Avoid using excessive force during connection or disconnection.