Jungle Green Kitchen Splashback - Warren Reed - Designer - 60 x 60cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for homeowners looking to enhance their kitchen's aesthetic and functionality with a durable and stylish splashback. The primary benefit is the high-resolution printed design on premium 6mm toughened glass, offering a striking focal point that is also hygienic and easy to clean. A key consideration is the requirement for a specific clear natural curing adhesive for installation.
All features
| Model Part Number | 60 x 60cm |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What type of adhesive should I use?
You must use a Clear Natural Curing Adhesive for installation. Please refer to the adhesive manufacturer's instructions for proper application.
Can this splashback be drilled into?
No, the splashback is designed to be installed using adhesive and should not be drilled into, as this can cause the toughened glass to shatter.
How do I clean the 'Jungle Green' design?
Clean the surface with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Avoid abrasive materials that could scratch the print.
Is this splashback heat resistant?
Yes, the splashback is made from 6mm toughened glass and can withstand temperatures up to 400°C, making it suitable for use behind cooktops.
What are the available sizes for this splashback?
This particular model is 60cm x 60cm. Other sizes are available, including W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
What is the warranty period?
The splashback comes with a 1-year guarantee.
Can I cut the splashback to a custom size?
No, cutting toughened glass requires specialized equipment and can compromise its integrity. It is recommended to purchase the size that fits your requirements.
Troubleshooting
Splashback not adhering properly
Ensure you are using the recommended Clear Natural Curing Adhesive and that the wall surface is properly prepared (clean, dry, smooth). Follow the adhesive manufacturer's instructions precisely for application and curing times.
Scratches appearing on the surface
While scratch-resistant, the glass can be damaged by very abrasive materials. Avoid using scouring pads or harsh cleaning agents. Clean gently with a soft cloth.
Bubbles visible behind the glass
This usually indicates an issue with adhesive application. Ensure the adhesive was spread evenly without gaps. If the adhesive is still curing, some minor bubbles may dissipate. If fully cured and visible, professional re-installation might be necessary.
Difficulty cleaning stubborn stains
For tougher stains, try a solution of warm water and a small amount of dish soap. Apply with a soft cloth, let it sit for a moment, then wipe clean. Rinse with a damp cloth and dry thoroughly.
Pros and Cons
Pros
- Adds significant visual appeal and style to the kitchen.
- Durable and long-lasting due to toughened glass construction.
- Hygienic and simple to maintain cleanliness.
- Protects walls from cooking splatters and stains.
- Resistant to heat and scratches for practical use.
Cons
- Requires specific clear natural curing adhesive for installation.
- Installation may require professional assistance if not experienced.
- Glass can be heavy, requiring careful handling during fitting.
- Design is fixed; limited customization options beyond size.
- Limited warranty period of one year.
Setup, Compatibility & Care Instructions
Setup:
Installation requires the use of a Clear Natural Curing Adhesive. Ensure the wall surface is clean, dry, and smooth before application. Apply the adhesive evenly to the wall or the back of the splashback according to the adhesive manufacturer's instructions. Carefully position the splashback and press firmly to ensure good adhesion. Allow the adhesive to cure completely as per its specifications before cleaning or using the area.
Compatibility:
This splashback is designed for installation on most standard wall surfaces suitable for adhesive mounting. It is ideal for use behind gas and electric cooktops, hobs, and sinks. Ensure adequate ventilation if used behind a hob, especially if it's a gas hob.
Care:
To clean the splashback, use a soft, damp cloth with a mild, non-abrasive kitchen cleaner. Avoid using harsh chemicals, scouring pads, or abrasive cleaners, as these can damage the printed surface or the glass. Wipe dry with a clean, soft cloth. The hygienic surface makes daily cleaning quick and effortless.