Yato HVLP Air Spray Gun with Fluid Cup - 0.8 mm - 0.1 L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Yato YT-2357 HVLP Air Spray Gun is designed for professionals and DIY enthusiasts needing precise paint application for various projects. Its key benefit is the HVLP (High Volume, Low Pressure) design, which ensures efficient paint transfer and reduces overspray, saving material. A potential caveat is the small 0.1L cup capacity, requiring more frequent refills for larger jobs. This tool features a 0.8 mm nozzle, a 0.30 Mpa operating pressure, and a lightweight design for comfortable handling.
All features
| Model Part Number | YT-2357 |
|---|---|
| Brand | Yato |
Extended Product Information
FAQs
What is the purpose of the HVLP design?
HVLP stands for High Volume, Low Pressure. This design ensures a higher percentage of paint is transferred to the surface, reducing waste from overspray and improving efficiency.
What type of paints can I use with the Yato YT-2357?
This spray gun is suitable for use with all types of paints, including lacquers, enamels, stains, and other coatings. However, thicker paints may require thinning to achieve optimal atomization.
How often should I clean the spray gun?
It is crucial to clean the spray gun immediately after each use to prevent paint from drying and clogging the internal parts and nozzle. Thorough cleaning ensures longevity and consistent performance.
What is the recommended operating pressure?
The recommended maximum operating pressure for the Yato YT-2357 is 0.30 Mpa, which is equivalent to approximately 3 bar or 43.5 PSI.
Is the 0.1L cup capacity sufficient for large jobs?
The 0.1L cup is designed for smaller projects or touch-ups. For larger areas, you will need to refill the cup frequently. Consider alternative setups or multiple refills for extensive work.
What maintenance is required for this spray gun?
Regular maintenance involves immediate cleaning after use, periodic checks of seals and O-rings, and ensuring the nozzle and air cap are free from clogs. Proper lubrication of moving parts after cleaning can also extend its lifespan.
Do I need a special type of air compressor?
You need an air compressor that can supply sufficient airflow (220 l/min) and maintain a regulated pressure around 0.30 Mpa. A compressor with a good regulator is recommended for consistent results.
Troubleshooting
Uneven spray pattern or splattering
Check for clogs in the nozzle or air cap. Ensure paint is properly thinned and the cup is sufficiently filled. Verify correct air pressure.
Paint not flowing from the cup
Ensure the gravity feed cup is properly attached. Check that the fluid needle is moving freely. Thin the paint if it's too viscous.
Gun leaking air
Check all connections for tightness. Inspect seals and O-rings for wear or damage and replace if necessary.
Poor atomization (large droplets)
Increase air pressure slightly. Thin the paint further. Clean the nozzle and air cap thoroughly.
Paint buildup in the cup
Ensure the gravity feed design is oriented correctly. Clean the cup immediately after use to prevent drying.
Pros and Cons
Pros
- Efficient paint transfer reduces material waste.
- HVLP technology minimizes overspray for cleaner work.
- Precise 0.8 mm nozzle is suitable for detailed work.
- Easy-to-clean gravity feed cup.
- Durable construction for professional use.
Cons
- Small 0.1L cup capacity requires frequent refills for large projects.
- May require a higher volume air compressor due to HVLP design.
- Primarily suited for thinner paints; thicker paints may require thinning.
- Requires proper air compressor setup and maintenance.
Setup, Compatibility & Care
Setup:
- Connect the spray gun to an air compressor using a 1/4" hose fitting and ensure your compressor can provide at least 220 l/min of airflow at the required operating pressure.
- Fill the 0.1L gravity cup with your chosen paint. Ensure the paint is properly thinned for optimal atomization (refer to paint manufacturer's recommendations).
- Adjust the air pressure on your compressor to the recommended 0.30 Mpa (approximately 3 bar).
- Perform a test spray on a scrap surface to dial in your technique and ensure proper flow.
Compatibility:
- Air Source: Requires a working air compressor capable of delivering the specified airflow and pressure. Ensure the compressor has a regulator for precise pressure control.
- Paints: Suitable for use with all types of paints, including lacquers, enamels, stains, and thin-bodied coatings. Thicker paints may require thinning.
Care:
- Immediate Cleaning: After each use, immediately clean the cup, nozzle, and internal passages to prevent paint from drying and clogging.
- Disassembly: Partially disassemble the gun (cup, needle, nozzle) for thorough cleaning.
- Cleaning Agents: Use the appropriate solvent for the type of paint used (e.g., lacquer thinner for lacquers, mineral spirits for enamels).
- Lubrication: Lightly lubricate moving parts with a suitable lubricant after cleaning, if recommended by the manufacturer.
- Storage: Store the clean and dry spray gun in its protective box away from dust and moisture.