QuickBond Instant Adhesive 3g Twin Pack.
Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This Maestro Craft Quickbond Instant Adhesive is designed for crafters and DIY enthusiasts needing a fast, reliable bond for small repairs and projects. Its key benefit is its rapid setting time, allowing for quick assembly. A caveat is its small 3g size, suitable for intricate work rather than large-scale applications.
| Model Part Number | 6597080 |
|---|---|
| Brand | 151 |
While the bond forms in seconds, full cure can take up to 24 hours for maximum strength.
This adhesive is not recommended for porous materials like fabric, as it may not create a strong bond and can soak through.
Unopened tubes typically have a shelf life of 12-24 months when stored correctly in a cool, dry place. Once opened, use within 3-6 months for best performance.
Once fully cured, the bond created by Quickbond Instant Adhesive is generally water-resistant, making it suitable for items that may come into contact with moisture.
This adhesive is not formulated for food-safe applications. It is best to avoid using it on items that will directly contact food.
For uncured adhesive, try to wipe it away immediately with a dry cloth. For cured adhesive on surfaces (not skin), acetone (nail polish remover) may help soften it, but test on an inconspicuous area first as it can damage some plastics.
Ensure surfaces are clean, dry, and free of dust, oil, or grease. Ensure adequate pressure is applied for a few seconds after bonding. Check if the adhesive is still within its shelf life.
Carefully try to clear the nozzle with a pin or fine needle. If hardened, you may need to use a fresh tube.
Work on one small area at a time. Have all components ready before applying the adhesive. Practice on scrap materials to get a feel for the setting time.
Do not force skin apart. Soak the affected area in warm, soapy water. Gently try to peel or roll the skin apart. If significant bonding occurs or irritation persists, consult a medical professional.
Setup: No setup is required. Ensure the surfaces to be bonded are clean, dry, and free from dust or grease for optimal adhesion. For best results, apply in a well-ventilated area.
Compatibility: Works effectively on most non-porous materials including hard plastics, rubber, metal, ceramics, and some wood. It is not recommended for use on styrofoam, polyethylene, Teflon, silicone rubber, or fabrics.
Care: Store tubes upright in a cool, dry place away from direct sunlight and heat. Keep the cap tightly sealed to prevent the adhesive from drying out. Always clean the nozzle after use if necessary.
