DeWalt Pressure Washer - Body Only
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The DeWalt DCMPW1000N-XJ is a cordless 54V XR FLEXVOLT Brushless Power Cleaner designed for professionals needing high-mobility cleaning solutions. Its key benefit is the freedom to clean anywhere without power cords or water mains, drawing water from any source. A potential caveat is that this is a body-only unit, requiring separate battery and charger purchase.
All features
| Model Part Number | DCMPW1000N-XJ |
|---|---|
| Brand | DeWalt |
| Options | Body Only |
Extended Product Information
FAQs
Is a battery and charger included with the DCMPW1000N-XJ?
No, this is a body-only unit. A DeWalt 54V XR FLEXVOLT battery and charger must be purchased separately.
What is the maximum pressure rating of this power cleaner?
The DeWalt DCMPW1000N-XJ has a rated pressure of 69 bar (approx. 1000 PSI) in High mode and 45 bar (approx. 650 PSI) in Low mode.
Can I use any water source with this pressure washer?
Yes, thanks to its self-prime functionality and supplied siphon hose, you can draw water from buckets, tanks, ponds, or other non-pressurized sources.
How long will a battery last?
Runtime varies significantly based on the battery capacity (Ah) and the pressure/speed setting used. Higher pressure and speed consume more power.
What type of maintenance is required?
Regular care involves flushing with clean water after use, cleaning the inlet filter, and storing properly. The brushless motor and axial pump are designed for reduced wear and longer life with minimal user maintenance.
Can I use this for domestic cleaning tasks?
Yes, while designed for professionals, it can be used for domestic tasks like cleaning patios, cars, or garden furniture. The adjustable pressure settings make it versatile for various surfaces.
Troubleshooting
Unit will not power on.
Ensure the 54V XR FLEXVOLT battery is fully charged and correctly inserted. Check that the safety trigger lock is disengaged.
Low water pressure or inconsistent spray.
Check for kinks or blockages in the inlet or outlet hoses. Ensure the water source is adequate and the siphon hose is fully submerged. Clean the water inlet filter. Verify the correct pressure setting (High/Low) is selected for the task.
Unit stops during operation.
The battery may be depleted; try a fully charged battery. Overheating can also cause a shutdown; allow the unit to cool down. Check for any safety cut-offs engaged.
Water leaking from connections.
Ensure all hose connections are securely tightened. Check O-rings or seals for damage and replace if necessary.
Pros and Cons
Pros
- Complete cordless freedom for use in any location.
- High cleaning power with up to 69 bar rated pressure.
- Versatile water source compatibility (self-priming).
- Adjustable pressure and variable speed for different cleaning tasks.
- Durable brushless motor and premium pump design for longevity.
Cons
- Body-only unit; requires separate purchase of battery and charger.
- Runtime is dependent on battery capacity and usage intensity.
- Higher initial investment due to FLEXVOLT battery system needs.
- May require more effort to operate than corded, higher-flow units for very large areas.
Setup, Compatibility & Care
Setup:
- Ensure you have a compatible DeWalt 54V XR FLEXVOLT battery and charger (sold separately).
- Connect the battery to the designated port on the power cleaner.
- Attach the high-pressure hose to the outlet port and the cleaning accessory (e.g., spray gun) to the hose.
- For non-mains water sources, submerge the end of the supplied siphon hose into the water reservoir and connect the other end to the water inlet.
- Ensure the water source is clean to prevent pump damage.
Compatibility:
- This unit is compatible with all DeWalt 54V XR FLEXVOLT batteries.
- It uses standard pressure washer accessories, but DeWalt branded attachments are recommended for optimal performance.
Care:
- After each use, flush the system with clean water, especially if using non-potable water sources, to remove debris.
- Store the unit in a dry, protected area. Avoid freezing temperatures, which can damage the pump and hoses.
- Periodically check the water inlet filter for blockages and clean as needed.
- Wipe down the exterior with a damp cloth. Do not use abrasive cleaners.