Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners and renovators looking to add a stylish and practical focal point to their kitchen. The Laura Ashley Mr Jones Dove Grey Splashback offers a quick way to update your kitchen's aesthetic with its classic geometric pattern and sophisticated metallic finish. While it provides a beautiful, easy-to-install surface, its self-adhesive nature requires careful application to ensure a smooth, lasting finish.
| Brand | Laura Ashley |
|---|
The splashback measures 750mm in height, 900mm in width, and 6mm in thickness.
Yes, it can be installed over smooth, clean, and well-adhered tiles. Ensure the tile surface is free from grime and moisture.
While glass is generally heat resistant, it's recommended to maintain a safe distance from direct high heat sources like open flames, in accordance with safety guidelines and local regulations.
Clean with a soft, damp cloth and mild soap. Avoid abrasive cleaners which can damage the metallic finish.
It is possible to reposition immediately after application if done very carefully. However, once the adhesive has set, removal may be difficult and could potentially damage the wall surface or the splashback.
The self-adhesive backing works best on smooth, clean, dry, and non-porous surfaces such as painted drywall, laminate, or existing smooth tiles. Avoid textured, damp, or unfinished surfaces.
Yes, the geometric 'Mr Jones' pattern is designed to repeat, allowing for seamless application across larger areas if multiple splashbacks are used.
Ensure the wall surface was thoroughly cleaned, dried, and free of dust/grease before application. Reapply pressure, focusing on edges. If the problem persists, the surface may not be compatible or may require a suitable wall primer.
Carefully lift the affected section and reapply, smoothing with a soft cloth or plastic smoother from the center outwards. For small bubbles, a fine pin prick may allow air to escape.
Use a glass cutter for precise cuts. Measure carefully and practice cuts on a scrap piece if possible. Ensure you have the correct tools and safety equipment for cutting glass.
Use a non-abrasive glass cleaner or a mixture of water and vinegar. Dry immediately with a clean, lint-free microfiber cloth to prevent streaks.
Setup:
Compatibility:
Care:
