Guardian Internal Cladding Internal Corner - 2400mm - Brushed Gold
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Guardian Internal Cladding Internal Corner trim is an essential component for DIYers and contractors looking to achieve a seamless, professional finish when installing 10mm wall or ceiling panels. Engineered specifically for right-angle junctions, this trim effectively hides raw panel edges while providing a decorative, brushed gold aesthetic that elevates the look of bathrooms, kitchens, and showers. While it provides an excellent moisture-resistant seal and clean lines, users should note that the 2400mm length is fixed, meaning precise measuring and cutting are required before installation to ensure a perfect fit in smaller or custom-height spaces.
All features
| Model Part Number | 4010060545 |
|---|---|
| Brand | Guardian |
Extended Product Information
FAQs
Can I use this trim with 8mm panels?
This trim is designed specifically for 10mm panels. Using it with 8mm panels may result in a loose fit that allows movement.
Is the finish resistant to water?
Yes, the brushed gold aluminium finish is designed for wet areas like showers and kitchens.
Can I use this for external corners?
No, this is specifically an internal corner trim. External corners require a different profile shape.
How do I cut the aluminium without scratching the finish?
Use a fine-tooth hacksaw and consider applying masking tape to the area you are cutting to protect the gold finish.
Does this trim come with mounting hardware?
No, mounting hardware is not included. It is typically installed using high-quality panel adhesive or small screws.
What is the total length of the piece?
Each length is 2400mm.
Troubleshooting
Trim is too long for the wall
Use a hacksaw with a fine-tooth blade to trim the aluminium to your specific required length.
Panel does not slide easily into the channel
Check that the panel edge is cut straight and free of burrs; slightly chamfer the edge of the panel if it remains tight.
Visible gaps between trim and wall
Ensure the wall corner is truly square (90 degrees); if the wall is bowed, use a small amount of gap-filling adhesive behind the trim before fixing.
Pros and Cons
Pros
- Provides a clean and professional aesthetic finish
- High-quality brushed gold finish offers a luxury look
- Aluminium build ensures long-term durability in wet environments
- Simplifies installation by removing the need for corner silicone
- Perfectly sized for standard 10mm wall and ceiling panels
Cons
- Requires manual cutting to fit specific wall heights
- Fixed length of 2400mm may lead to wastage in small areas
- Limited to 90-degree internal corner applications only
- Color matching with non-Guardian panels is not guaranteed
Setup, Compatibility & Care
To install, measure your wall height accurately and use a fine-tooth hacksaw to cut the 2400mm trim to size. Ensure the internal corner is plumb before fixing the trim to the substrate using appropriate adhesives or screws. For best results, use a neutral-cure silicone sealant along the edges where the trim meets the panels to maintain a fully waterproof barrier. To maintain the brushed gold finish, clean regularly with a soft, damp cloth and mild soap; avoid using abrasive scrubbers or harsh acidic cleaners, which could scratch the surface or strip the finish.