Vallejo Model Air Paint - Interior Grey Green 18ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for modelers who want to achieve a precise and durable matte finish with their airbrush projects using Vallejo Model Air paint. The primary benefit is the paint's exceptional historical accuracy and rapid drying time, allowing for efficient and detailed work. However, remember that the paint's performance is optimized when used with an airbrush and Vallejo's recommended thinners.
All features
| Model Part Number | 71305 |
|---|---|
| Brand | Vallejo |
Extended Product Information
FAQs
Can I use this paint with a brush?
Yes, Vallejo Model Air can be applied with a brush, although it is specifically designed for airbrushing. Thin the paint appropriately for brush use.
What is the recommended air pressure for airbrushing?
The recommended air pressure is between 15 – 20 PSI (0.5 to 1 kg). This may vary based on your airbrush and thinning.
Do I need to prime my model before painting?
Yes, priming is recommended to ensure proper paint adhesion and a more durable finish.
How do I clean my airbrush after using Vallejo Model Air paint?
Use Vallejo Airbrush Cleaner to clean your airbrush immediately after use. Disassemble the airbrush and clean all parts thoroughly.
Can I mix Vallejo Model Air paints with other acrylic paints?
Yes, you can mix Vallejo Model Air paints with other acrylic paints, but it's best to test the compatibility on a small area first.
What is the shelf life of Vallejo Model Air paint?
The shelf life depends on storage conditions. When stored properly, unopened bottles can last for several years.
What if the paint is too thick?
Thin the paint with Vallejo Airbrush Thinner or Flow Improver. Start with a 1:1 ratio and adjust as needed.
Troubleshooting
Paint is clogging the airbrush.
Clean the airbrush thoroughly after each use with Vallejo Airbrush Cleaner. Ensure the paint is properly thinned.
Paint is not adhering to the surface.
Ensure the surface is properly primed before painting. Lightly sand the surface if needed. Adjust the airbrushing pressure.
Paint is drying too quickly on the needle.
Increase the humidity, and use a flow improver to slow down the drying process.
Color appears uneven.
Apply thin, even coats of paint. Multiple thin coats are better than one thick coat.
Pros and Cons
Pros
- Excellent for airbrushing due to its viscosity and formulation.
- Dries quickly, speeding up the modeling process.
- Provides a durable and resistant finish.
- Water-based, making cleanup easy and safe.
- Offers a high degree of historical accuracy.
- Maintains fine details.
Cons
- May require thinning for optimal airbrush performance.
- Requires proper airbrush maintenance.
- Color accuracy dependent on proper application and surface preparation.
- May not be suitable for all types of models or surfaces.
- Optimal results achieved with Vallejo's recommended products.
Setup, Compatibility & Care
Setup
- Airbrush: Ensure you have a working airbrush system, including an air compressor and airbrush.
- Thinning: If needed, thin the paint with Vallejo Airbrush Thinner or Flow Improver. Start with a ratio of 1:1, adjusting as necessary.
- Mixing: Mix the paint thoroughly before use to ensure the color is consistent.
Compatibility
- Airbrushes: Compatible with most airbrushes.
- Thinners: Best results are achieved with Vallejo Airbrush Thinner and Flow Improver.
- Primers: Compatible with most acrylic primers, especially those designed for airbrushing.
Care
- Cleaning: Clean your airbrush immediately after use with Vallejo Airbrush Cleaner to prevent clogging.
- Storage: Store paint in a cool, dry place, away from direct sunlight. Close the bottle tightly after use.