Frenchic Trim Paint - Wedgewood Green
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Trim Paint in Wedgewood Green is designed for DIY enthusiasts and furniture refinishers looking for a durable, easy-to-use finish for interior wood, furniture, and even certain metals. Its key benefit is the 'all-in-one' formulation, which eliminates the need for separate primers and top coats, saving time and effort. A potential caveat is that achieving the most durable finish may require two coats, impacting coverage per tin.
All features
| Colour | Green |
|---|---|
| Model Part Number | 40315049836631 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I need to prime before using Frenchic Trim Paint?
No, Frenchic Trim Paint is self-priming, meaning you can apply it directly to most prepared surfaces without a separate primer.
Do I need a top coat after painting?
No, this paint is also self-sealing, so no top coat is required. It dries to a durable, scuff-resistant finish on its own.
What surfaces can I use this paint on?
It's suitable for interior woodwork, trims, skirting, doors, radiators, metal, and furniture including kitchen cupboards and laminate surfaces.
How much area does a 500ml tin cover?
A 500ml tin covers approximately 7m² with one coat. For a more durable finish, two coats are recommended, so you can expect to cover around 3.5m².
Is this paint suitable for children's furniture?
Yes, it is certified to EN71-3 standards, making it safe for use on children's toys and furniture.
How do I clean my brushes after use?
Clean your brushes and tools immediately after use with warm, soapy water.
What is the recommended drying time between coats?
Allow at least 2 hours for drying between coats, but this can vary depending on temperature and humidity. Ensure the surface is touch-dry before applying the next coat.
Troubleshooting
Paint is too thick or streaky
Ensure the paint is stirred thoroughly. If still too thick, you may add a *very* small amount of water (less than 5%) to improve flow, but do so sparingly as it can affect the finish. Ensure you are using a quality brush or roller.
Poor adhesion or chipping
The surface may not have been adequately prepared. Ensure it was clean, dry, and free from oils or waxes. For very glossy surfaces, a light scuff sand is recommended before painting.
Uneven sheen or finish
This can occur if coats are applied too thickly or if the paint is not stirred consistently. Ensure even application and stir the paint regularly during use. Allow adequate drying time between coats as per manufacturer recommendations.
Paint not drying properly
Check ambient temperature and humidity; paint dries best in a well-ventilated area between 10-25°C. Avoid applying very thick coats, which can prolong drying times.
Pros and Cons
Pros
- Eliminates need for primer and top coat, saving time and materials.
- Excellent adhesion on various surfaces including laminate and metal.
- Durable, scuff-resistant finish suitable for busy areas.
- Low odour and low VOC formulation enhances user comfort.
- Safe for children's toys due to EN71-3 certification.
- Timeless Wedgewood Green colour complements diverse decor styles.
Cons
- Coverage estimates are based on two coats for durability, potentially halving the stated coverage per tin.
- May not be suitable for exterior use.
- Requires a specific drying time between coats for optimal results.
- The soft-satin finish might not be preferred over a high-gloss or matte finish by some users.
- Requires adequate ventilation during application, like most paints.
Setup, Compatibility & Care
Setup: Ensure the surface to be painted is clean, dry, and free from grease or contaminants. Lightly sanding glossy surfaces can improve adhesion. Stir the paint thoroughly before use. Apply with a good quality brush or roller suitable for water-based paints.
Compatibility: Suitable for interior woodwork, trims, skirting, doors, powder-coated radiators, metal, and various furniture types including wood and laminate. Not recommended for exterior use.
Care: Clean brushes and tools immediately after use with warm soapy water. For the painted surface, clean gently with a damp cloth. Avoid harsh abrasives or strong cleaning chemicals to maintain the finish.