Loops 5 Zone Outdoor Bluetooth System - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Loops 5 Zone Outdoor Bluetooth System is designed for homeowners looking to enjoy high-quality audio in their gardens, patios, or outdoor dining areas. Its key benefit is the ability to stream music wirelessly via Bluetooth to 10 weatherproof speakers, maintaining a true stereo signal across multiple zones. A key consideration is that the amplifier is not outdoor rated and requires protection from the elements.
All features
| Colour | White |
|---|---|
| Brand | Loops |
Extended Product Information
FAQs
Can I use different outdoor speakers with this amplifier?
The amplifier is designed to work with speakers that match its power output (60W per speaker recommended). Ensure any replacement speakers are compatible in terms of impedance and power handling to avoid damage.
How far can I place the speakers from the amplifier?
The kit includes 100m of speaker cable, allowing for significant placement flexibility. Ensure the cable runs are not excessively long, as this can impact sound quality. For runs over 30-50m, consider using thicker gauge cable if possible.
Is the amplifier suitable for permanent outdoor installation?
No, the amplifier is not outdoor rated and must be protected from rain, moisture, and direct sunlight. It should be installed indoors or within a robust, weatherproof enclosure.
Can I control the volume for each zone independently?
The 5-zone splitter allows you to select which zones are active, but volume control is typically managed centrally by the amplifier's main volume knob. Some amplifiers may offer individual zone volume, but this specific kit's splitter focuses on zone selection.
What is the range of the Bluetooth connection?
Typical Bluetooth range is around 10-15 meters (33-50 feet) in an open area. This can be reduced by walls, obstructions, and interference from other wireless devices.
Do the speakers require a separate power source?
No, the speakers are passive and receive power directly from the amplifier through the speaker cables.
Troubleshooting
No sound from speakers
Ensure the amplifier is powered on and volume is up. Check all speaker wire connections at the amplifier and speaker terminals. Verify the correct zone is active and Bluetooth or line-in is selected.
Poor sound quality or distortion
Check that the speaker wire connections are secure and not shorting. Reduce the volume to avoid overdriving the speakers. Ensure the Bluetooth device is within range and not experiencing interference.
Bluetooth connection issues
Turn Bluetooth off and on again on your device. Restart the amplifier. Ensure no other devices are actively connected to the amplifier's Bluetooth. Move your device closer to the amplifier.
Only one channel is playing
Verify that the left and right speaker wires are correctly connected to their respective amplifier outputs and that the zone splitter is configured correctly for stereo output.
Pros and Cons
Pros
- Delivers true stereo sound for an immersive outdoor audio experience.
- Includes 10 weatherproof speakers for broad coverage.
- Bluetooth connectivity for convenient wireless streaming.
- 5-zone control offers flexibility in audio management.
- Comes with all necessary cabling and mounting hardware.
Cons
- Amplifier is not outdoor rated and needs protection from weather.
- Speakers should avoid direct splashes and heavy rainfall.
- Requires user to manage speaker placement for optimal stereo imaging.
- Setup may require some technical understanding for zone configuration.
Setup, Compatibility & Care
Setup:
- Placement: Determine optimal locations for the 10 outdoor speakers, considering your desired sound coverage and stereo separation.
- Amplifier Setup: Place the amplifier in a dry, protected indoor location, or within a suitable outdoor-rated enclosure. Connect the UK power supply.
- Speaker Wiring: Run the outdoor-rated speaker cable from the amplifier's speaker outputs to each of the 10 speakers. Use the 5-zone splitter to manage connections to the amplifier outputs.
- Connections: Connect your audio source to the amplifier's line inputs if not using Bluetooth.
- Pairing: Enable Bluetooth on your device and pair it with the amplifier.
Compatibility:
- The system is compatible with any Bluetooth-enabled device (smartphones, tablets, laptops).
- Line inputs support standard audio devices with RCA or 3.5mm outputs (adapter may be needed).
Care:
- Speakers: Wipe down with a damp cloth as needed. While weatherproof, avoid direct, prolonged exposure to heavy rain or water jets. Consider positioning them under eaves for extra protection.
- Amplifier: Keep the amplifier strictly indoors or in a weatherproof enclosure. Dust regularly with a dry cloth. Ensure adequate ventilation.
- Cables: Inspect speaker cables periodically for any damage. Ensure connections are secure.