AK Interactive Dark Gull Grey FS 36231 17ml AIR 3G Acrylic Model Paint
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This AK Interactive 17ml AIR 3G acrylic paint in Dark Gull Grey FS 36231 is designed for modelers seeking authentic aircraft colors. Its key benefit is providing accurate, historically relevant shades for aircraft of any era. A potential caveat is that acrylic paints require proper thinning for optimal airbrush performance.
All features
| Model Part Number | 11884 |
|---|---|
| Brand | AK Interactive |
Extended Product Information
FAQs
Is this paint suitable for beginners?
Yes, the acrylic base makes it user-friendly with easy cleanup. However, optimal airbrush performance may require some practice with thinning.
Can I use this paint with a brush?
Yes, the paint can be applied with a brush. It is recommended to thin it slightly with water or acrylic thinner to achieve a smoother finish and avoid brush marks.
What is the best thinner for this paint?
AK Interactive offers specific acrylic thinners that work well. Water can also be used, or other acrylic-specific thinners. Experiment to find what works best with your airbrush and technique.
How long does the paint take to dry?
The paint typically dries to the touch within 15-30 minutes, depending on humidity and application thickness. It can be handled lightly after a few hours and fully cures in about 24 hours.
Can I mix this color with other AK Interactive acrylics?
Yes, AK Interactive 3G acrylic paints are designed to be intermixable, allowing you to create custom shades.
What kind of primer should I use?
A primer designed for plastic models, such as a grey or white acrylic primer, is recommended for best adhesion and color representation.
Troubleshooting
Paint is too thick for airbrush
Shake the bottle more thoroughly and add acrylic thinner or water gradually until the desired consistency is reached. Refer to thinning recommendations for airbrush use.
Uneven coverage or "tip dry" on airbrush needle
Ensure the paint is adequately thinned. Try increasing air pressure slightly or adding a flow improver. Clean the airbrush needle regularly.
Paint peeling or not adhering well
Ensure the model surface is clean, dry, and properly primed. Avoid applying to glossy or greasy surfaces without preparation.
Paint drying too quickly in the airbrush cup
Use an airbrush with a lid or consider adding a small amount of a retarder or flow improver to the thinning mixture.
Pros and Cons
Pros
- Provides historically accurate paint shades for aircraft.
- AIR 3G formula is optimized for airbrush use.
- Acrylic base allows for easy cleanup with water.
- 17ml bottle size is practical for hobbyists.
Cons
- Requires thinning for airbrush use, especially for beginners.
- Limited color selection within the specific 'AIR' range.
- May require multiple coats for opaque coverage on dark primers.
Setup, Compatibility & Care
To prepare AK Interactive Dark Gull Grey FS 36231 for use, shake the bottle vigorously for a minute or two to ensure the pigments are fully mixed. For airbrushing, thin the paint with an acrylic thinner or water (typically a ratio of 1:1 or 2:1 paint to thinner, adjusted to preference and airbrush settings). Clean your airbrush immediately after use with water or an acrylic airbrush cleaner.
This paint is compatible with most plastic model kits. It adheres well to primed surfaces. For best results, apply to a model that has been cleaned of dust and grease. Store the paint with the lid tightly sealed in a cool, dry place away from direct sunlight to maintain its consistency and prevent drying out.