Sulcado Slat Wall Panel Trim - 26.5mm x 2600mm x 12mm - Right Hand - Grey Oak
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Sulcado Right Hand Trim is the ideal finishing solution for homeowners and professionals installing Sulcado Slatwall Panels who want a seamless, high-end aesthetic. This trim piece excels at covering exposed edges and hiding panel joints to create a cohesive, professional wall finish, though users should ensure they are ordering the correct side (right vs. left) to match their specific wall configuration.
All features
| Model Part Number | ISCGORHT |
|---|---|
| Brand | Sulcado |
Extended Product Information
FAQs
Does this trim come in other colors?
This specific model is designed to match the Grey Oak finish of the Sulcado Slatwall series.
Can I use this on the left side of my wall?
No, this is a Right Hand specific trim. The half-lap joint profile is directional, and a Left Hand trim is required for the opposite side.
What tools do I need for installation?
You will need a measuring tape, a fine-tooth saw for cutting to length, and a high-quality construction adhesive.
Is the trim flexible?
No, this trim is rigid and is intended for straight, flat surfaces.
How do I secure the trim permanently?
Use a suitable panel adhesive along the back, and optionally use small pin nails or brads for extra stability.
Troubleshooting
Trim does not fit flush with the panel
Verify that you are using the correct orientation (Right Hand vs. Left Hand). Also, check the panel edge for debris or dried glue that may be obstructing the joint.
Trim is too long for the installation area
Carefully measure your wall height and use a fine-tooth saw to trim the excess from the end of the profile.
Pros and Cons
Pros
- Ensures a clean, professional edge for wall paneling
- Easy to integrate due to the half-lap joint design
- Coordinated Grey Oak finish matches the slat wall system
- Covers unsightly gaps or rough-cut panel ends
Cons
- Specific to the 'Right Hand' orientation, requiring careful project planning
- Length of 2600mm may require cutting for shorter wall heights
- Not compatible with other brands of slat wall systems
Setup, Compatibility & Care
Setup: Before installing, ensure your final slat wall panel is firmly secured. Apply a high-quality construction adhesive to the back of the trim or the wall contact point. Insert the trim's flange into the panel's half-lap joint, ensuring it sits flush against the panel face. If necessary, use pin nails to hold the trim in place until the adhesive cures.
Compatibility: This product is designed exclusively for Sulcado Slat Wall Panels. It is not compatible with other brands due to the proprietary dimensions of the tongue-and-groove/half-lap connection.
Care: Maintain the trim by wiping it down with a soft, dry cloth. Avoid using harsh chemical cleaners or abrasive scrubbers, as these may damage the Grey Oak finish. If the trim becomes dusty, a light microfiber duster is usually sufficient.