Woodland Scenics Scenic Cement - 16 fl oz
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for model railroad enthusiasts and diorama builders looking to permanently secure scenic materials like ballast and turf. Woodland Scenics Scenic Cement provides a strong, lasting bond with a matte finish. However, be mindful of overspray and ensure proper ventilation during application.
All features
| Model Part Number | S191 |
|---|---|
| Brand | Woodland Scenics |
Extended Product Information
FAQs
Can I use Scenic Cement on all types of scenery materials?
Yes, Scenic Cement is designed to work with most model railroad and diorama materials, including ballast, turf, ground foam, and foliage.
How do I clean up Scenic Cement?
Clean up spills immediately with water while the cement is still wet. Once dry, it may be more difficult to remove.
Is Scenic Cement toxic?
No, Scenic Cement is water-based and non-toxic.
Can I dilute Scenic Cement?
It is generally not recommended to dilute Scenic Cement unless specifically directed by the manufacturer. Using it as is, will provide the best results.
How long does it take for Scenic Cement to dry?
Drying time depends on the thickness of the application and the environmental conditions, but it typically takes a few hours to dry completely.
Can I use a regular spray bottle instead of the Scenic Sprayer?
While technically possible, the Scenic Sprayer is recommended for a more even and controlled application, which helps prevent clogging and overspray.
How should I store Scenic Cement?
Store Scenic Cement in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
Scenic Cement is not adhering properly.
Ensure the surface is clean and free of debris. Apply a thin, even coat of Scenic Cement. Allow sufficient drying time.
Spray nozzle is clogging.
Clean the spray nozzle with water. Make sure to use the correct Scenic Cement dilution, if needed. Store the Scenic Cement properly to prevent it from drying out.
Scenic Cement is drying with a glossy finish.
Ensure you are using the correct Scenic Cement product. If the finish is still glossy, you may have applied too much cement. Try applying a thinner coat.
Pros and Cons
Pros
- Ready to use, saving time and effort.
- Provides a strong and lasting bond.
- Dries clear, preserving the natural look of your scenery.
- Water-based formula allows for easy cleanup.
- Works well with a variety of scenery materials.
- Designed for use with Scenic Sprayer for even application.
Cons
- Overspray can be an issue if not applied carefully.
- Requires adequate ventilation during application.
- May require multiple coats for thicker materials.
- Can clog spray nozzles if not properly maintained.
- Drying time may vary depending on humidity and application thickness.
Setup, Compatibility & Care
- Preparation: Ensure the surface is clean and free of loose debris.
- Application: Can be applied with a brush or a Scenic Sprayer. Hold the sprayer approximately 6-8 inches from the surface. When using a brush, apply a thin, even coat.
- Drying: Allow the cement to dry completely. Drying time will vary depending on the thickness of the application and the humidity level.
- Compatibility: Compatible with most model railroad and diorama materials.
- Care: Store in a cool, dry place. Clean up spills immediately with water while the cement is still wet. Clean the Scenic Sprayer after use to prevent clogging.