G.Skill Trident Z5 Neo - 64 GB - DDR5 - 6000 MHz
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This G.Skill Trident Z5 Neo memory kit is designed for PC builders seeking high-performance DDR5 memory, particularly on AMD platforms. Its key benefit is delivering 64GB of fast 6000 MHz RAM with optimized AMD EXPO profiles for seamless overclocking. A potential caveat is its specific optimization for AMD, which may not yield the same plug-and-play benefits on Intel systems without manual tuning. This kit features two 32GB modules of DDR5 memory with a CAS latency of 32 and includes a heatsink for thermal management.
All features
| Series | Trident Z5 Neo |
|---|---|
| Model Part Number | F5-6000J3238G32GX2-TZ5N |
| Brand | G.Skill |
Extended Product Information
FAQs
What is the primary advantage of the G.Skill Trident Z5 Neo series?
The Trident Z5 Neo series is specifically engineered and optimized for ultra-high overclocked performance on DDR5-enabled AMD platforms, featuring AMD EXPO technology for simplified overclocking.
Does this memory kit work with Intel processors?
Yes, this kit supports Intel Extreme Memory Profile (XMP) 3.0, allowing for overclocking on compatible Intel platforms. However, it is primarily optimized for AMD EXPO.
What does CAS Latency (CL) 32 mean?
CAS Latency (CL) is the number of clock cycles it takes for the memory module to respond to a command. A CL of 32 means it takes 32 clock cycles. Lower CL is generally better, and CL32 is considered good for DDR5 at this speed.
How do I enable AMD EXPO or Intel XMP?
You need to access your computer's BIOS/UEFI during startup (usually by pressing DEL, F2, or F12). Look for memory settings, overclocking options, or profiles, and select the appropriate EXPO or XMP profile. Save and exit the BIOS.
Is ECC memory supported with this kit?
No, this kit uses Unregistered (unbuffered) memory and does not support Error-Correcting Code (ECC).
What is the voltage of this memory kit?
This memory kit operates at a voltage of 1.4V when running at its rated speed with EXPO/XMP enabled.
Can I mix this kit with other RAM modules?
It is strongly recommended to use only modules from the same kit for optimal stability and performance. Mixing RAM modules from different kits, even if they have similar specifications, can lead to instability or failure to boot.
Troubleshooting
System does not boot or POSTs with new RAM
Reseat the RAM modules firmly in their slots. Ensure they are installed in the correct dual-channel configuration as per your motherboard manual. Try booting with only one module at a time. Ensure the EXPO/XMP profile is disabled in BIOS initially and try enabling it only after confirming basic system stability.
System is unstable or crashes after enabling EXPO/XMP
The motherboard or CPU may not fully support the rated speed or timings at the default voltage. Try manually increasing the memory voltage slightly (e.g., by 0.01V increments, up to 1.45V) or loosening timings in the BIOS. Ensure your motherboard BIOS is updated to the latest version.
RAM not recognized at full capacity (e.g., only 32GB detected)
Verify that both modules are properly seated. Check the system's BIOS to ensure it recognizes the full 64GB. If using Windows, check System Information to confirm the total installed memory. Ensure the operating system is 64-bit, as 32-bit OS cannot address more than ~4GB of RAM.
Pros and Cons
Pros
- High total capacity (64GB) suitable for intensive tasks.
- Fast DDR5 performance at 6000 MHz.
- Optimized for AMD platforms with EXPO support for easy overclocking.
- Includes Intel XMP 3.0 support for broader compatibility.
- Effective heatsinks for thermal management and stability.
- Dual-channel configuration maximizes memory bandwidth.
Cons
- Primarily optimized for AMD platforms; performance on Intel may require manual configuration.
- DDR5 technology requires a compatible motherboard and CPU.
- Higher voltage (1.4V) compared to some standard DDR5 modules.
Setup, Compatibility & Care
Setup: Ensure your motherboard supports DDR5 memory and is listed on the Qualified Vendor List (QVL) for this specific memory kit if possible. Install the two RAM modules into the designated dual-channel slots as per your motherboard manual (typically slots A2 and B2). After installation, boot into your system's BIOS/UEFI. To achieve the advertised speeds, enable the AMD EXPO profile (on AMD systems) or the Intel XMP 3.0 profile (on Intel systems). Save settings and exit.
Compatibility: This kit is a 288-pin DDR5 DIMM. It requires a motherboard with DDR5 slots and a CPU that supports DDR5 memory. It is specifically designed and optimized for AMD platforms utilizing EXPO, but also supports Intel XMP 3.0. Always check your motherboard manufacturer's specifications for memory compatibility and maximum supported speeds.
Care: The modules feature heatsinks for passive cooling. Ensure there is adequate airflow within your PC case. Avoid exposing the memory modules to excessive dust or moisture. To clean, power off and unplug your system, then use a soft, dry brush or compressed air to remove dust from the heatsinks. Never use liquids for cleaning.