Coloured Tropical Leaves Glass Bathroom Splashback - Warren Reed - Designer
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Warren Reed glass splashback is ideal for homeowners looking to add a sophisticated and hygienic focal point to their bathroom. Its key benefit is providing a stylish, grout-free alternative to tiles that is highly resistant to moisture and stains. A potential caveat is its specific size (W600mm x H250mm), which may require careful placement. This splashback features a durable 6mm toughened glass construction with a high-quality, vibrant print, offering both aesthetic appeal and practical moisture resistance.
All features
| Model Part Number | 5056782155990 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What type of adhesive should I use?
A strong, clear silicone sealant or a specific glass splashback adhesive is recommended. Please refer to the adhesive manufacturer's instructions for suitability and application. Adhesive is not included with the splashback.
Can I cut the splashback to size?
No, this splashback is made from toughened safety glass and cannot be cut or modified after manufacturing. Attempting to do so will shatter the glass.
How do I clean the coloured print?
Clean the print using a soft cloth with warm, soapy water. Avoid abrasive cleaners or scouring pads, which can scratch the surface.
Is this splashback suitable for a shower enclosure?
This splashback is designed for bathroom walls, primarily behind basins, and is resistant to moisture. It is not intended as a full shower wall panel or enclosure.
What is the size of the splashback?
The splashback measures W600mm x H250mm.
Does it require drilling?
No, installation does not require drilling. It is designed to be adhered directly to the wall using an appropriate adhesive.
What makes it resistant to mould and stains?
The smooth, non-porous surface of the toughened glass prevents moisture, soap scum, and toiletries from penetrating and causing stains or mould growth, unlike porous tile grout.
Troubleshooting
Splashback not adhering to the wall
Ensure the wall surface is completely clean, dry, and smooth. Reapply a fresh coat of appropriate adhesive, ensuring even coverage and sufficient pressure during application. Check that the adhesive used is suitable for glass and bathroom conditions.
Visible imperfections on the printed surface
Inspect the splashback carefully before installation. If imperfections are noted, contact the retailer. Once installed, avoid abrasive cleaning methods that could further damage the print.
Gaps or unevenness during installation
Ensure the wall surface is perfectly flat. Minor unevenness can sometimes be compensated for by the adhesive, but significant wall imperfections will be visible. For best results, ensure the wall is perfectly flat and smooth before applying the splashback.
Pros and Cons
Pros
- Provides a stylish, modern aesthetic without the hassle of grout.
- Excellent resistance to bathroom-specific issues like moisture, mould, and stains.
- Durable construction using toughened safety glass.
- Simple and non-invasive installation process.
- Low maintenance and easy to keep clean.
Cons
- Fixed size (W600mm x H250mm) may not fit all spaces.
- Requires a smooth, clean, and stable surface for proper adhesion.
- Designed primarily for bathroom basins, may not be suitable for all wall areas.
- High-quality print might be susceptible to scratching from abrasive cleaning tools.
- Adhesive needed for mounting is not included and must be purchased separately.
Setup, Compatibility & Care
Setup:
- Ensure the wall surface behind the basin is clean, dry, smooth, and free from dust or grease.
- Apply a suitable, strong adhesive (e.g., silicone sealant or a specific glass splashback adhesive, not included) to the back of the glass splashback according to the adhesive manufacturer's instructions.
- Carefully align the splashback with the desired position above the basin and press firmly against the wall.
- Hold in place for the recommended time or use temporary supports if needed, until the adhesive cures.
Compatibility:
- This splashback is designed for installation on flat, smooth, non-porous wall surfaces. It is not suitable for uneven, textured, or wallpapered walls.
- Ideal for use behind bathroom basins, vanities, or small wet area walls.
- Ensure adequate ventilation in the bathroom to manage overall humidity.
Care:
- Clean regularly using a soft, damp cloth and warm, soapy water.
- Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the printed surface.
- Wipe dry with a clean, soft cloth after cleaning to prevent water spots.