Rangemaster Chimney Cooker Hood - Silver, B
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Rangemaster chimney cooker hood is designed for home cooks who want to maintain a fresh kitchen environment. Its key benefit is powerful extraction with flexible installation options (ducted or recirculating). A potential caveat is its energy efficiency rating of B, which is good but not the highest available. This hood offers three speed settings, LED lighting for visibility, and simple button controls, making it a practical addition to most kitchens.
All features
| Colour | Silver |
|---|---|
| Energy Efficiency | B |
| Model Part Number | UHDF100SS/ |
| Brand | Rangemaster |
Extended Product Information
FAQs
Can this hood be used in recirculating mode?
Yes, this hood is designed for both ducted and recirculating installation. For recirculating mode, you will need to ensure carbon filters are installed.
How often should I clean the filters?
It is recommended to clean the metal grease filters regularly, typically every 1-2 months depending on usage, to maintain optimal performance. The filters are washable.
What is the maximum extraction rate?
The maximum extraction power is 610 m³/h, with a boost position offering up to 710 m³/h.
What type of lighting does it use?
The hood features two LED bulbs, each with a power of 1W, providing efficient illumination for your hob.
What are the dimensions of the hood?
The hood has a width of 1000 mm, a depth of 450 mm, and an adjustable height ranging from 600 mm to 1060 mm.
What is the energy efficiency rating?
The energy efficiency class is B, with an annual energy consumption of 73.1 kWh.
Does it come with a carbon filter?
Yes, the product information states it includes a carbon filter, which is necessary for recirculating installations.
Troubleshooting
Hood not extracting air
Check that the hood is properly plugged in and that the circuit breaker hasn't tripped. Ensure the filters are clean or correctly installed, and that there are no blockages in the ducting if used in ducted mode.
Lights not working
Ensure the hood is powered on. Check if the LED bulbs need replacing. Refer to the manual for the correct bulb type and replacement procedure.
Excessive noise
Ensure the hood is securely mounted and that no loose parts are vibrating. Check that the filters are clean and correctly fitted. If the noise persists, especially on lower settings, it may indicate a motor issue.
Low extraction power
Clean or replace the grease filters. If using recirculating mode, check the condition of the carbon filters. Ensure the ducting (if used) is not obstructed.
Pros and Cons
Pros
- Flexible ducted or recirculating installation
- Powerful maximum extraction rate of 710 m³/h on boost
- Clear LED lighting for hob visibility
- Easy-to-use button controls
- Washable grease filters for convenient maintenance
- Wide 100cm design suitable for larger hobs
Cons
- Energy efficiency class is B, not the highest available
- Noise level can reach up to 69 dB on intensive speed
- Requires a 15cm exhaust connection diameter when ducted
- Button controls may be less aesthetically modern than touch controls for some users
Setup, Compatibility & Care
Setup:
This cooker hood is designed for wall mounting and features a ducted or recirculating extraction type. Ensure you have the appropriate ducting kit or carbon filters (included) ready for installation based on your chosen method. The chimney height is adjustable between 600mm and 1060mm to fit various ceiling heights.
Compatibility:
It requires a standard 220-240V AC power supply with a connected load of 130W. The exhaust connection diameter is a minimum of 15cm when used in ducted mode. Ensure your cooker hob is of a suitable size (ideally 100cm wide to match the hood).
Care:
Regularly clean the metal/charcoal grease filters. They are washable, which helps maintain extraction efficiency. Wipe down the exterior of the hood with a soft, damp cloth. Refer to the user manual for specific cleaning instructions for the LED bulbs and internal components.