Marlborough Premium Oak Matt Porcelain Wood Effect Floor Tile (9 Pack - 1.22 M2 Coverage) - Grey

Yes, these tiles are suitable for use on walls in shower enclosures due to their water resistance and durable porcelain material.

Each box contains 9 tiles.

Each box covers 1.22 square meters.

The matt finish provides a degree of slip resistance, but caution should always be exercised in wet areas. For enhanced safety, consider using appropriate grout and ensuring proper installation.

While DIY installation is possible, professional installation is recommended, especially for underfloor heating integration and to ensure a flawless finish and warranty compliance.

The tile depth is 0.8 cm.

Each tile is a plank format measuring 90 cm x 15 cm.

This is often due to an uneven subfloor or inconsistent adhesive application. Ensure the subfloor was properly prepared and that adhesive was spread evenly. Minor unevenness may be addressed with appropriate grout fill.

This can be caused by using the wrong cleaning products. Switch to a pH-neutral tile cleaner and rinse thoroughly with clean water. Avoid waxes or polishes.

Verify that the correct type of adhesive and grout were used, and that the UFH system was installed according to manufacturer specifications. Ensure there are no air pockets beneath the tiles.

Ensure you are using a sharp diamond blade on your wet tile saw and that the tile is properly supported during the cut. Avoid excessive force.