Original Gorilla Glue - Brown - 60ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Original Gorilla Glue is a high-performance, waterproof polyurethane adhesive ideal for DIY enthusiasts, woodworkers, and professionals tackling repairs and projects. Its key benefit is creating strong, lasting bonds across a wide variety of materials, even filling gaps as it cures. A potential caveat is its expansion during curing, which requires careful application to avoid excess squeeze-out.
All features
| Colour | Brown |
|---|---|
| Brand | Gorilla |
Extended Product Information
FAQs
How much glue should I use?
Use sparingly. Gorilla Glue expands to fill gaps. Apply a small amount to one surface, as too much can lead to excessive squeeze-out and waste.
Does Gorilla Glue need moisture to cure?
Yes, Original Gorilla Glue requires moisture to cure. Lightly dampening one of the surfaces with water will initiate and ensure a strong cure.
How long does it take to cure?
Initial set time is typically 1-2 hours, but full cure can take 24 hours. Clamping is required during this period.
Can I use this glue on plastics?
Gorilla Glue is not recommended for all plastics. It does not bond well to polyethylene (PE) and polypropylene (PP). Test on a small, inconspicuous area first if unsure.
Is Gorilla Glue safe for food-contact surfaces?
No, Original Gorilla Glue is not recommended for applications that come into direct contact with food.
What is the shelf life of Gorilla Glue?
When stored properly in a cool, dry place with the cap tightly sealed, Gorilla Glue typically has a shelf life of 2 years from the date of manufacture.
How do I clean up uncured glue?
Wipe away uncured glue immediately with a damp cloth. Once cured, it is very difficult to remove and may require mechanical abrasion or a solvent (test in an inconspicuous area first).
Troubleshooting
Glue is not curing or bonding properly.
Ensure surfaces are properly prepared (clean and free from oils). Lightly dampen one surface with water as moisture is required for curing. Ensure adequate clamping pressure is applied during the curing process.
Excessive glue squeeze-out during clamping.
Apply less glue to begin with. Use a damp cloth to wipe away excess squeeze-out *immediately* before it begins to cure. Protect surrounding areas with tape or a drop cloth.
Glue bottle nozzle is clogged.
Attempt to clear the nozzle with a fine pin or wire. If severely clogged, you may need to carefully remove the dried glue with a utility knife or replace the bottle.
Bond feels weak after curing.
Check if surfaces were properly cleaned and prepared. Ensure adequate moisture was present for curing and that surfaces were clamped tightly for the full recommended cure time.
Pros and Cons
Pros
- Provides a very strong and permanent bond.
- Waterproof nature makes it suitable for diverse environments.
- Adheres to a broad range of materials.
- Fills gaps effectively, enhancing structural integrity.
- Comes in a convenient pack for ongoing use.
Cons
- Expands significantly during curing, requiring careful application.
- Can be difficult to clean up if excess glue is not removed promptly.
- Requires moisture to cure, which might not be ideal for all applications without initial wetting.
- Can stain certain materials if not handled with care.
- Requires protective gear due to its strong bonding properties.
Setup, Compatibility & Care
Setup:
- Ensure surfaces are clean, dry, and free from dust and oils.
- Lightly dampen one surface with water (a fine mist is sufficient) for optimal curing.
- Apply a small amount of glue to one surface. Note: Gorilla Glue expands as it cures, so use sparingly.
- Clamp the surfaces together firmly and allow to cure fully (typically 24 hours).
Compatibility:
- Ideal for: Wood, stone, metal, ceramic, glass, foam, concrete, and more.
- Not recommended for: Plastics like polyethylene or polypropylene, and not suitable for bonding fabrics or repair to skin.
Care:
- Store bottles in a cool, dry place, tightly sealed.
- Wipe away any excess glue immediately with a damp cloth. Once cured, it is difficult to remove.
- Wear protective gloves and eyewear during application to protect skin and eyes.