Dell Memory Module - 8 GB - 2666 MHz - SNPY7N41C/8G
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Dell SNPY7N41C/8G is an ideal upgrade for users looking to boost system responsiveness and multitasking capabilities on compatible PC and server workstations. This 8 GB DDR4 memory module offers a reliable path to smoother performance by increasing available overhead for demanding applications. Please note that this is a 288-pin DIMM module intended for desktop or server motherboards, so it is not compatible with laptop systems requiring SO-DIMM form factors.
All features
| Model Part Number | SNPY7N41C/8G |
|---|---|
| Brand | Dell |
Extended Product Information
FAQs
Will this work in my laptop?
No, this is a 288-pin DIMM module designed for desktops and servers. Laptops typically require smaller SO-DIMM memory.
Can I mix this with different brands of RAM?
While it may work, it is best practice to use identical memory modules to ensure optimal stability and performance.
What is the memory speed of this module?
This module operates at a frequency of 2666 MHz.
Does this memory support error correction (ECC)?
This module is an unbuffered DIMM; please check your motherboard documentation to see if it supports this specific type.
Is this DDR4 or DDR3 memory?
This is a DDR4 memory module.
What should I do if my system is slower after the upgrade?
Check your BIOS settings to ensure the memory is being correctly identified and that no conflicting XMP profiles are enabled.
Troubleshooting
System fails to boot after installation
Ensure the module is fully seated in the DIMM slot and that the retaining clips have clicked into place.
Memory is not detected by the operating system
Try reseating the module in a different DIMM slot or clearing the CMOS settings if the motherboard fails to recognize new hardware.
System instability or blue screens
Run a memory diagnostic tool, such as MemTest86, to check for potential hardware defects or seating issues.
Pros and Cons
Pros
- Significantly improves multitasking performance
- Reliable Dell-certified component quality
- Energy-efficient 1.2 V operating voltage
- Standardized 288-pin DIMM for wide compatibility
Cons
- Not compatible with laptop systems
- Limited to 2666 MHz speed
- Requires installation inside the computer chassis
Setup, Compatibility & Care
Installation should be performed while the computer is completely powered off and disconnected from the wall outlet. To install, locate the 288-pin DIMM slots on your motherboard, open the retaining clips on the sides of the slot, and align the notch on the memory module with the key in the slot. Apply firm, even pressure until the clips snap into place. Before purchase, verify that your motherboard supports DDR4 memory and has a 288-pin DIMM slot available, as this module is not physically compatible with SO-DIMM slots found in portable computers. To maintain optimal performance, keep the interior of your case free of dust to ensure proper airflow and cooling across the memory modules.