DID 520 Pitch ZVMX Heavy Duty X-Ring Motorcycle Drive Chain - 130 Link, Gold / Gold
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The DID 520 Pitch ZVMX Heavy Duty X-Ring Motorcycle Drive Chain is designed for riders seeking consistent power delivery and stable load handling for everyday motorcycle use. Its key benefit lies in the X-Ring sealing system, which significantly reduces friction and maintains lubrication for extended component life. A potential caveat for some users might be the specialized ZJ rivet link, which requires a specific riveting tool for installation.
All features
| Model Part Number | DID520ZVMXGG130 |
|---|---|
| Brand | DID |
Extended Product Information
FAQs
What is the main advantage of the X-Ring seal?
The X-Ring seal has four contact points, which significantly improves lubrication retention and reduces friction compared to standard O-ring or non-sealed chains. This leads to longer life and better performance.
Do I need a special tool to install this chain?
Yes, the DID 520 ZVMX chain uses a ZJ rivet link, which requires a specialized DID ZJ riveting tool for proper and secure installation. A standard chain breaker and clip tool are not sufficient.
How often should I lubricate and clean this chain?
Lubrication frequency depends on riding conditions, but a general guideline is every 300-500 miles or after riding in wet conditions. Cleaning should be done whenever the chain appears dirty, typically at the same time as lubrication.
What does '520 Pitch' mean?
The '520' refers to the chain's pitch, which is the distance between the inner and outer plates' centers. It also denotes the width of the chain rollers. This is a standard measurement for motorcycle drive chains.
Is this chain suitable for high-performance motorcycles?
Yes, the ZVMX series is DID's premium X-Ring chain, designed for high tensile strength and durability, making it suitable for a wide range of motorcycles, including those with higher horsepower and torque.
How does the ZJ rivet link compare to a clip-type master link?
The ZJ rivet link, when installed correctly with the proper tool, provides a connection that is as strong as the rest of the chain, offering superior security and durability compared to most clip-type master links.
Can I mix and match sprockets with this chain?
While the 520 pitch is standard, it's highly recommended to use sprockets specifically designed for 520 pitch chains and to ensure they are in good condition. Using mismatched sprockets can lead to premature wear and performance issues.
Troubleshooting
Chain is noisy during operation
Ensure the chain is properly lubricated and clean. Check for excessive wear or if the chain is too tight or too loose. Verify that the ZJ rivet link was installed correctly.
Premature chain stretch or elongation
Verify correct sprocket alignment and that the chain tension is set according to manufacturer specifications. Ensure the chain is suitable for the motorcycle's power output and riding style. Inspect for damage to bushings or plates.
Difficulty installing the ZJ rivet link
Ensure you are using the correct DID ZJ riveting tool and that it is properly engaged with the pin. Follow the tool manufacturer's instructions precisely.
X-Ring seals appear damaged or are leaking lubricant
Inspect the seals for any cuts or damage. If damaged, the chain should be replaced. Avoid using aggressive cleaning agents that could degrade the seal material.
Pros and Cons
Pros
- Enhanced durability and wear resistance due to X-Ring seals.
- Maintains consistent lubrication, reducing friction and heat.
- Solid construction helps prevent premature elongation.
- Designed for stable power transfer under demanding torque.
- Reliable performance for daily commuting and longer journeys.
Cons
- Requires a specialized ZJ riveting tool for proper installation.
- May be overkill for very low-power or casual riding applications.
- X-Ring seals can be more sensitive to dirt ingress than some other seal types.
- Higher initial cost compared to non-sealed or O-ring chains.
Setup, Compatibility & Care
Setup:
- Ensure the chain length is correct for your motorcycle application (refer to your motorcycle's service manual).
- The ZJ rivet link requires a specialized DID ZJ riveting tool for secure installation. A standard clip-style master link is not typically used with ZVMX chains.
- Properly align the sprockets and ensure the chain runs true.
- Use a riveting tool to press the shoulder pins and then peen the ends to create a secure, permanent connection.
Compatibility:
- This is a 520 pitch chain. Always confirm that your motorcycle is designed for a 520 pitch chain and compatible sprocket sizes.
- Check the manufacturer's specifications for the tensile strength rating against your motorcycle's power output.
Care:
- Regularly clean the chain using a dedicated chain cleaner and a soft brush. Avoid harsh solvents that could damage the X-Ring seals.
- Lubricate the chain periodically with a high-quality motorcycle chain lubricant suitable for X-Ring chains. Apply lubricant to the inside of the chain rollers.
- Inspect the chain for any signs of wear, damage, or kinks. Check for proper tension according to your motorcycle's service manual.