VIDAXL Console Table Legs - Black - 100 x (72-73) cm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
These VIDAXL console table legs are designed for DIY enthusiasts and furniture makers looking to create custom dining tables or desks. They offer a durable, stable, and modern foundation with adjustable feet for uneven surfaces. The primary caveat is that the tabletop is not included, requiring a separate purchase and assembly.
All features
| Colour | Black |
|---|---|
| Model Part Number | 4012804 |
| Brand | VIDAXL |
Extended Product Information
FAQs
What is included in the delivery?
The delivery includes two (2) dining table legs and the necessary screws (M5x18mm) for fixing them to a tabletop.
Is the tabletop included with the legs?
No, the tabletop is not included. You will need to purchase a suitable tabletop separately.
What material are the legs made of?
The legs are made of durable, powder-coated steel.
What are the overall dimensions of the legs?
The overall size is 100 cm wide by (72-73) cm high.
Can these legs be used for outdoor tables?
No, these legs are designed for indoor placement only.
How easy is it to assemble these legs?
Assembly is straightforward. It involves attaching the legs to your chosen tabletop using the pre-drilled holes and provided screws.
What is the purpose of the adjustable foot levelers?
The adjustable foot levelers allow you to stabilize the table on uneven surfaces and help prevent scratches on your flooring.
Troubleshooting
Table wobbles after assembly.
Ensure all screws are tightened securely. Adjust the plastic foot levelers on the bottom of each leg until the table is stable on the floor.
Screws do not fit the tabletop.
The provided screws are M5x18mm. Ensure your tabletop material can accommodate these screws. If using a very thin tabletop, consider shorter screws or reinforcing the mounting area. If the tabletop is too thick, you may need longer screws.
Legs appear uneven in height.
This is usually due to uneven flooring. Use the adjustable foot levelers to compensate for floor variations and achieve a level surface.
Surface finish is scratched.
Clean gently with a damp cloth. For minor scratches on the powder coating, you may be able to use a black furniture marker or touch-up paint, but avoid abrasive cleaning methods.
Pros and Cons
Pros
- Robust and durable construction from powder-coated steel.
- Stable design with an 80-degree incline and adjustable feet.
- Modern, clean aesthetic that complements various decor styles.
- Facilitates custom furniture building for dining tables or desks.
- Includes necessary screws for assembly.
Cons
- Tabletop is not included and must be purchased separately.
- Assembly is required, involving attaching legs to a tabletop.
- Limited to indoor use only.
- Specific dimensions may require careful tabletop selection.
Setup, Compatibility & Care
Setup:
- Ensure you have a suitable tabletop (not included) of appropriate size and weight capacity.
- Position the bracket of the table leg onto the underside of your tabletop, aligning the pre-drilled holes.
- Use the provided M5x18mm screws to securely attach the bracket to the tabletop.
- Repeat for the second leg.
- Once attached, place the table upright. Adjust the foot levelers as needed to ensure stability on your floor.
Compatibility:
- These legs are designed for indoor use.
- They are best suited for tabletops ranging from 100 cm in width and approximately 72-73 cm in height when installed.
- Ensure your tabletop has a flat underside for secure mounting.
Care:
- Clean the legs with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the powder coating.
- Periodically check the screws to ensure they remain tight and re-tighten if necessary.