Mahle Pulsar One Wireless Display - Mahle - MH33010000000000
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for riders using the Mahle Pulsar One Wireless Display, providing detailed information about your ride data, including battery status and assist level. The display is compatible with the X35+ system and acts as a remote control. Note that the mounting hardware is sold separately.
All features
| Model Part Number | MH33010000000000 |
|---|---|
| Brand | Mahle |
Extended Product Information
FAQs
Where can I purchase a mount?
Mounts are sold separately and can be found at authorized Mahle dealers or online retailers.
Is the display waterproof?
The display is designed to withstand normal riding conditions but is not fully waterproof. Avoid prolonged exposure to heavy rain or submersion.
How do I change the assist level?
Use the buttons on the display to cycle through the available assist levels. Refer to your ebike system's manual for specific instructions.
What kind of battery does the display use?
Check the display's specifications for battery type. Typically, these displays use a rechargeable internal battery.
What is the GXA dongle for?
The GXA dongle is required for compatibility with C-Type batteries. It facilitates communication between the display and the battery system.
How do I reset the display?
Refer to the user manual for the reset procedure. This usually involves pressing and holding specific buttons.
Can I use this display with other ebike systems?
The Pulsar One is specifically designed for the X35+ system. It may not be compatible with other systems.
Troubleshooting
Display not turning on.
Check the battery level. If the battery is low, recharge the display. Also, ensure the display is properly connected to the ebike system.
Display not connecting to the ebike system.
Make sure the ebike system is turned on and that ANT+ is enabled. Check for interference from other devices. Try re-pairing the display with the system.
Inaccurate data display.
Ensure the display is properly calibrated (if applicable). Check connections and settings within the ebike system. Consult the ebike system manual.
Pros and Cons
Pros
- Provides detailed ride information.
- Acts as a remote control for assist levels.
- Clear and easy-to-read monochrome display.
- Wireless connectivity for ease of use.
- Compatible with the popular X35+ system.
Cons
- Mounting hardware sold separately.
- Requires a GXA dongle for C-Type batteries.
- Monochrome display may not be as visually appealing as color displays.
- Dependent on ANT+ connectivity.
Setup, Compatibility & Care
- Mounting: Purchase and install the appropriate mount for your handlebars (sold separately).
- Pairing: Follow the pairing instructions in your ebike system's manual to connect the Pulsar One via ANT+.
- Battery: Ensure the display is charged or has sufficient battery life.
- GXA Dongle: If you have a C-Type battery, install the GXA dongle.
- Operation: Use the three buttons to navigate menus and adjust settings. Refer to the manual for specific button functions.
Care Instructions:
- Clean the display with a soft, damp cloth.
- Avoid using harsh chemicals or abrasive cleaners.
- Protect the display from extreme temperatures and direct sunlight when not in use.