Clutch Cable - Quinton Hazell - QCC1391
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Quinton Hazell QCC1391 clutch cable is for owners of RENAULT CLIO Mk1 models (1991-1998) needing a reliable replacement for their clutch control system. Its key benefit is ensuring smooth clutch operation for these specific vehicle years, restoring driving feel. A caveat is its compatibility is limited to RHD vehicles and specific engine sizes.
All features
| Model Part Number | QCC1391 |
|---|---|
| Brand | Quinton Hazell |
Extended Product Information
FAQs
What RENAULT CLIO Mk1 models is this clutch cable compatible with?
This cable is designed for RENAULT CLIO Mk1 (B/C57_, 5/357_) models from 1991 to 1998, specifically with 1.1L and 1.2L petrol engines. It is for Right Hand Drive vehicles only.
What are the OEM part numbers this cable is equivalent to?
This Quinton Hazell QCC1391 clutch cable is compatible with OEM references 7700809962 and 7700829067.
What is the length of this clutch cable?
The cable has a total length of 1787 mm.
Can this cable be used on Left Hand Drive (LHD) vehicles?
No, this specific part (QCC1391) is designed and specified for Right Hand Drive (RHD) vehicles only.
How often should I check my clutch cable?
It's advisable to visually inspect your clutch cable periodically, especially if you notice any changes in clutch pedal feel or gear shifting. Check for any signs of wear, fraying, or corrosion.
What happens if my clutch cable breaks?
If your clutch cable breaks, you will not be able to disengage the clutch, making it impossible to change gears or start the engine safely. The cable must be replaced immediately.
Does this cable require any special tools for installation?
Standard mechanic's tools are typically required for clutch cable replacement, including wrenches and possibly pliers. Refer to a vehicle service manual for specific tool recommendations and procedures.
Troubleshooting
Clutch pedal feels stiff or has excessive play.
Check for kinks or binding in the cable. Ensure it is correctly routed and adjusted. The cable may be stretched or damaged and require replacement.
Difficulty shifting gears, especially into first or reverse.
Verify the clutch cable is properly adjusted to allow full disengagement. If adjustment does not resolve the issue, the cable may be worn or stretched and needs replacement.
Cable snapped or detached.
Immediately replace the clutch cable. Inspect the connection points and lever mechanism for any damage that may have contributed to the failure.
Pros and Cons
Pros
- Ensures proper clutch engagement and disengagement.
- Designed for a direct fit on specified Renault Clio Mk1 models.
- Built with durable materials for extended service life.
- Meets or exceeds OEM specifications for performance.
- Restores smooth clutch operation.
Cons
- Only compatible with specific RENAULT CLIO Mk1 models (1991-1998).
- Limited to Right Hand Drive (RHD) vehicles.
- Not suitable for 1.4L or larger engine variants without confirmation.
- Requires mechanical knowledge for proper installation.
Setup, Compatibility & Care Instructions
Compatibility:
This clutch cable (QCC1391) is specifically designed for:
- RENAULT CLIO Mk1 (B/C57_, 5/357_) models produced between 1991 and 1998.
- Engine types: 1.1 Hatchback Petrol and 1.2 Hatchback Petrol.
- Important: This part is confirmed for Right Hand Drive (RHD) vehicles only.
Setup:
- Ensure the vehicle is safely supported on jack stands and the battery is disconnected.
- Locate the old clutch cable at the clutch pedal mechanism and the clutch release lever on the transmission.
- Disconnect the cable from both ends, noting the routing.
- Route the new QCC1391 cable following the original path.
- Connect the new cable to the clutch release lever and adjust the tension at the pedal end according to the vehicle's service manual.
- Reconnect the battery and test clutch operation.
Care:
Clutch cables are typically maintenance-free. However, regular visual inspection for signs of fraying, corrosion, or damage is recommended. Ensure the cable moves freely without binding. If the clutch pedal feels stiff or inconsistent, the cable may require adjustment or replacement.