Danelaw Mono Roll Out Ridge System - 6m
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Danelaw Mono Roll Out Ridge System (6m) is designed for roofers and contractors needing a versatile and reliable dry fix solution for securing mono ridge tiles. Its key benefit is universal compatibility with all common mono ridge tile profiles, ensuring a watertight seal. A potential caveat is the need for precise trimming of the gasket for optimal performance on specific roof configurations. This system offers a patented, flexible, trimmable gasket, continuous water channels with self-sealing detail, broader corrugations for varying pitches, and a wider Butyl strip for secure adhesion, streamlining installation while maintaining structural integrity and weatherproofing.
All features
| Model Part Number | HD MONO6+ |
|---|---|
| Brand | Danelaw |
Extended Product Information
FAQs
Is this system suitable for all types of ridge tiles?
The Danelaw Mono Roll Out Ridge System is engineered for universal compatibility with all commonly available *mono* ridge tile profiles. It is always advisable to check against specific tile manufacturer guidelines if you have any doubts.
Do I need to use mortar with this system?
No, this is a 'dry fix' system, meaning it does not require mortar for installation. This speeds up the process and reduces potential maintenance issues associated with cracked or failing mortar.
How do I achieve a watertight seal?
A watertight seal is achieved through the combination of the patented, trimmable gasket that can be customized to fit snugly, the continuous water channels with self-sealing detail, and the secure adhesion provided by the wider Butyl strip.
Can this system be used on any roof pitch?
Yes, the system features broader corrugations designed to accommodate varying roof pitch angles, offering flexibility for different installation requirements.
What is the length of the roll?
The Danelaw Mono Roll Out Ridge System comes in a convenient 6-metre length.
What tools are needed for installation?
Basic roofing tools are typically required, including a utility knife or appropriate cutting tool for trimming the gasket, a measuring tape, and fixings suitable for securing the system to the ridge batten. Ensure you have safety equipment appropriate for working at height.
How should I care for the system after installation?
The system requires minimal maintenance. Regular visual inspections of the roof ridge are recommended to ensure everything remains secure and clear of debris.
Troubleshooting
Water ingress along the ridge line
Ensure the gasket was trimmed correctly for a tight seal against the ridge tiles and batten. Verify that the Butyl strip has adequate adhesion and that all fixings are secure.
Ridge tiles are not sitting securely
Check that the system has been correctly positioned and fixed to the ridge batten. Confirm that the chosen fixings are appropriate for the tile and batten type and have been installed correctly.
Difficulty trimming the gasket
Use a sharp, high-quality utility knife or specialized cutting tool. Ensure the gasket is laid flat for a clean cut. Refer to installation guides for specific trimming techniques if available.
Butyl strip not adhering properly
Ensure the substrate (ridge batten) is clean, dry, and free from dust, grease, or any contaminants before applying the Butyl strip. Avoid installation in freezing temperatures or during rain.
Pros and Cons
Pros
- Offers universal compatibility with most mono ridge tiles.
- Trimmable gasket allows for precise, custom fits.
- Provides reliable weatherproofing with self-sealing water channels.
- Adaptable to various roof pitches due to broader corrugations.
- Secure and strong adhesion thanks to the wider Butyl strip.
- Efficient 6m length reduces installation time and potential leak points.
Cons
- Requires careful trimming of the gasket for optimal fit, which may add to installation time.
- Dry fix systems may have different long-term performance characteristics compared to traditional mortar.
- Performance can be dependent on correct installation techniques and substrate preparation.
- May not be suitable for all specialized or historical roofing systems.
- Initial cost might be higher compared to some basic ridge fixing methods.
Setup, Compatibility & Care
Setup:
- Preparation: Ensure the ridge batten is correctly installed and clear of debris. The surface should be dry and clean.
- Positioning: Unroll the Danelaw Mono Roll Out Ridge System along the ridge line.
- Trimming: Carefully trim the patented gasket using appropriate tools to match the specific profile and angle of the ridge tiles and roof construction.
- Adhesion: Remove the backing from the wider Butyl strip and firmly press the system onto the ridge batten, ensuring full contact.
- Fixing Ridge Tiles: Place the mono ridge tiles over the system according to manufacturer guidelines, ensuring they are properly supported and interlocked.
- Securing: Use appropriate fixings (not included) through the system and into the ridge batten as per local building codes and manufacturer recommendations to secure the system itself.
Compatibility:
- This system is designed for all commonly available mono ridge tile profiles. It is recommended to confirm compatibility with specific tile manufacturers if uncertain.
- Suitable for a wide range of roof pitch angles due to its broader corrugations.
Care:
- The Danelaw Mono Roll Out Ridge System is designed for minimal maintenance once installed.
- Regular visual inspections of the roof ridge are recommended to ensure the system and tiles remain secure.
- Clean any accumulated debris from the roof ridge area if necessary, taking care not to damage the ridge system.