Lieber GU10 Fire Rated Downlight - Brushed brass
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Lieber Brushed brass GU10 Fire rated downlight is designed for homeowners and electricians seeking a reliable, safe, and aesthetically pleasing lighting solution for modern interiors. Its key benefit is robust fire rating compliance, offering peace of mind. A potential consideration is that the bulb is not included and must be purchased separately. This downlight features a durable steel construction, easy installation with connector clips, and a high IP rating suitable for various environments.
All features
| Colour | Gold |
|---|---|
| Model Part Number | RL-LL-10-DLR001-1BB |
| Brand | LIEBER |
Extended Product Information
FAQs
Is the GU10 bulb included with the downlight?
No, the GU10 bulb is not included. You will need to purchase a compatible GU10 bulb separately.
What is the maximum ceiling thickness this downlight can be fitted into?
The downlight can be fitted into ceilings up to 30mm thick as standard. The springs can be repositioned to accommodate ceilings up to 45mm thick.
Can I use this downlight in a bathroom?
Yes, with its IP65 rating, this downlight is suitable for use in bathroom zone 1, offering protection against water jets and dust.
What types of bulbs can I use with this downlight?
You can use GU10 Halogen, standard size LED, and CFL bulbs with a maximum wattage of 35W.
Does this downlight require a transformer?
No, this downlight is designed for direct connection to 220-240V mains voltage and does not require a separate transformer.
What is the warranty period for this product?
This Lieber downlight is guaranteed for 3 years from the date of purchase.
How do I clean the brushed brass finish?
Gently wipe the finish with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners to preserve the finish.
Troubleshooting
Downlight does not turn on
Check that the power is switched on at the mains. Ensure the GU10 bulb is correctly seated in the holder and is functional. Verify all wiring connections are secure.
Dim or flickering light
This could be due to a faulty bulb. Try replacing the GU10 bulb with a new one. Ensure the bulb wattage does not exceed the 35W limit.
Unit feels loose in the ceiling
Ensure the springs are correctly positioned and firmly gripping the ceiling material. If the ceiling material is very thin or damaged, additional support may be needed.
Pros and Cons
Pros
- Excellent fire safety rating for peace of mind.
- High IP65 rating makes it suitable for bathrooms and other potentially damp areas.
- Attractive brushed brass finish enhances interior design.
- Simple installation process with included clips.
- Accommodates a wide range of bulb types, including energy-efficient LEDs.
- Backed by a 3-year guarantee.
Cons
- GU10 bulb is not included and requires a separate purchase.
- Ceiling thickness adjustment requires repositioning springs.
- Requires a transformer (stated as No in description, but typical GU10 setups do not require external ones for mains voltage).
Setup, Compatibility & Care
Setup:
- Ensure the power is switched off at the mains.
- Cut a hole in the ceiling with the specified 72mm cut-out diameter.
- For ceilings up to 30mm thick, use the default spring positions. For ceilings up to 45mm thick, reposition the springs accordingly.
- Connect the GU10 bulb (not included) to the lamp holder.
- Wire the downlight to your mains supply using the provided connector clips.
- Insert the downlight into the ceiling aperture, allowing the springs to secure it in place.
- Restore power.
Compatibility:
- Compatible with GU10 Halogen, standard size LED, and CFL bulbs.
- Maximum bulb wattage: 35W.
- Suitable for ceilings up to 30mm thick (adjustable to 45mm).
- Operates on 220-240V.
Care:
- Always ensure power is disconnected before cleaning.
- Wipe the exterior with a soft, dry or slightly damp cloth.
- Avoid using abrasive cleaners or solvents, as these can damage the brushed brass finish.