Showerwall Pearl Grey - Proclick - 2440x900mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Showerwall Pearl Grey - Proclick panels are designed for homeowners and renovators seeking a stylish, low-maintenance alternative to traditional tiles in bathrooms and shower areas. The key benefit is its 100% waterproof, grout-free system that ensures a seamless and hygienic finish, installed quickly and easily. A potential consideration is the specific requirement for Proclick trims to achieve the seamless join, meaning standard trims may not be compatible.
All features
| Model Part Number | MSSWPEGRPCEG22000 |
|---|---|
| Brand | Showerwall |
Extended Product Information
FAQs
What is the Proclick system?
The Proclick system is an integrated joint on the panels that allows them to click together, forming a seamless and watertight connection without the need for additional trims.
Can I install Showerwall over existing tiles?
Yes, Showerwall panels can be installed directly over existing tiles, provided the surface is smooth, clean, and stable. This can save significant time and effort on surface preparation.
Do I need to use special sealant?
Yes, it is recommended to use Showerwall-specific sealant in the Proclick groove before joining panels to ensure a completely watertight seal.
How do I clean the Pearl Grey gloss finish?
Clean the surface with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid abrasive materials that can scratch the gloss.
What are the dimensions of this panel?
This specific panel is 2440mm in height and 900mm in width.
Is this product suitable for a steam shower?
While the panels are 100% waterproof, it is recommended to check manufacturer guidelines for specific suitability in high-steam environments, especially regarding ventilation and constant direct steam exposure.
What material is the panel made from?
The panel is available in either Plywood or Exterior-Grade MDF, both suitable for bathroom and shower environments.
Troubleshooting
Panels do not click together easily.
Ensure there are no obstructions or debris in the Proclick groove. Check that the panel edges are clean and undamaged. Verify you are using the correct Proclick system panels.
Water seeping at the joints.
Ensure Showerwall sealant was applied to the Proclick groove before joining. Check that the panels are fully engaged and the seal is complete. Reapply sealant if necessary and re-join panels.
Panel surface is scratched or damaged.
Minor scratches on the gloss finish may be buffed out with a soft cloth. For significant damage, the affected panel may need to be replaced. Avoid using abrasive cleaning materials.
Panel appears warped or distorted.
Ensure the panels have been acclimated to the room's temperature and humidity for at least 48 hours before installation. Avoid installation in areas with extreme temperature fluctuations without proper ventilation.
Pros and Cons
Pros
- 100% waterproof for superior moisture protection.
- Grout-free system means less cleaning and no mold/mildew issues.
- Fast and simple installation, potentially reducing labor costs.
- Can be installed over existing surfaces, saving time on surface preparation.
- Hygienic and easy to maintain with a simple wipe-down.
- Seamless finish with the Proclick system for a sleek look.
Cons
- Requires specific Proclick trims for seamless joining.
- Gloss finish may show water spots or smudges more readily than matte finishes.
- Initial cost may be higher than some basic tile options.
- Requires precise cutting for complex shapes or around fixtures.
- Not suitable for areas with extreme temperature fluctuations without proper acclimation.
Setup, Compatibility & Care
Setup:
- Ensure the substrate (wall) is clean, dry, and structurally sound. Panels can be installed over most existing wall surfaces, including tiles, provided they are smooth and stable.
- Measure and cut panels accurately using a fine-toothed saw or jigsaw. Always measure twice and cut once.
- Apply Showerwall sealant to the Proclick groove on one panel before connecting the next panel to ensure a watertight seal.
- Push the panels together firmly to engage the Proclick mechanism.
- Secure panels to the wall using appropriate fixings (e.g., screws or adhesive suitable for wall panels).
Compatibility:
- The Proclick system requires compatible Proclick trims for corners and edges to maintain the seamless, waterproof finish. Standard trims may not be compatible with the Proclick joint.
- Suitable for use with most standard bathroom fixtures and fittings.
Care:
- Clean surfaces regularly with a soft, damp cloth and mild, non-abrasive household cleaner.
- Avoid using abrasive cleaners, scouring pads, or solvents, as these can damage the gloss finish.
- Wipe away excess water and soap residue promptly to maintain the pristine appearance.