Tamiya Cement - Low Odour - 40ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Tamiya Low Odour Cement is designed for hobbyists working in shared or sensitive environments, offering a strong bond with minimal fumes. While it excels in providing a user-friendly, less flammable option for styrene and ABS plastics, users should be aware that its water-based nature may require longer drying times compared to traditional solvent-based cements. It features a convenient built-in brush for precise application.
All features
| Model Part Number | 87238 |
|---|---|
| Brand | Tamiya |
Extended Product Information
FAQs
What types of plastic can I use this cement on?
This cement is specifically formulated for styrene and ABS plastics, which are commonly used in scale model kits.
How does the 'Low Odour' feature benefit me?
The low odour formulation means you can use the cement indoors with significantly less smell and fewer fumes compared to traditional solvent-based plastic cements, making it ideal for shared spaces or sensitive environments.
Is this cement safe to use around children or pets?
While it is less flammable and has lower odour than solvent-based cements, it is still a chemical adhesive. Always use in a well-ventilated area, keep out of reach of children and pets, and follow all safety precautions.
How long does it take for the bond to fully cure?
Drying and curing times can vary based on application thickness, humidity, and temperature. Generally, allow several hours for a full cure. Initial handling strength is usually achieved within 30-60 minutes.
Can I use this cement for 'gap filling'?
This cement is best for creating strong bonds between two fitting pieces of plastic. For filling larger gaps, you might consider using a dedicated putty or filler product after the main assembly is complete.
Does the integrated brush need special cleaning?
The brush can be cleaned with water immediately after use. If the adhesive dries, try to gently remove it. Ensure the cap is sealed tightly to prevent the brush from drying out.
What is the shelf life of this product?
When stored correctly (upright, cool, dry, sealed), Tamiya adhesives typically have a shelf life of 2-3 years. However, performance may degrade over time.
Troubleshooting
Cement not bonding effectively
Ensure both plastic surfaces are clean, dry, and free from dust or grease. Apply a thin, even layer of cement to both surfaces before joining. Allow adequate drying time.
Brush becomes stiff or clogged
Gently clean the brush with water immediately after use. If the adhesive has dried, try to soften it with a damp cloth or by soaking the brush tip briefly in water. Ensure the cap is sealed tightly when not in use.
Plastic becomes overly soft or melts excessively
This cement is designed to gently soften plastic for bonding. If excessive melting occurs, you may be applying too much adhesive or the plastic type might be more sensitive. Use a lighter application and ensure sufficient ventilation.
Bottle is difficult to open
Ensure the cap is properly sealed after each use. If it becomes stuck, try gently warming the cap area with your hands or a warm, damp cloth. Avoid using excessive force.
Pros and Cons
Pros
- Significantly reduced odour for comfortable indoor use.
- Less flammable properties enhance safety during use.
- Built-in brush offers convenient and precise application.
- Effective on common hobby plastics like styrene and ABS.
- User-friendly design suitable for beginners and experienced hobbyists.
Cons
- May require longer drying times compared to solvent-based cements.
- Water-based formulation might not be suitable for all plastic types or extreme environmental conditions.
- Bond strength may vary depending on surface preparation and application technique.
Setup, Compatibility & Care
Setup: No setup is required. Simply unscrew the cap, which contains the applicator brush, and apply the cement directly to the surfaces to be joined. Ensure both surfaces are clean and dry for optimal adhesion.
Compatibility: This cement is specifically designed for styrene and ABS plastics. It is not recommended for use on other plastic types, painted surfaces, or materials other than plastic.
Care: Store the bottle upright in a cool, dry place, away from direct sunlight and heat sources. Ensure the cap is securely closed after each use to prevent the adhesive from drying out. Clean the brush with water if it becomes clogged with dried adhesive, but do this promptly after use.