Phoenix Contact M12 Sensor Plug - 8CON PG9
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Phoenix Contact M12 Sensor Plug (MPN: 1513774) is designed for industrial automation, offering a robust solution for connecting sensors and actuators. Its key benefit is secure, pre-wired connections for efficient installations. A potential caveat is its specific PG9 mounting thread, requiring compatibility with existing hardware. This guide covers its features, use, and maintenance.
All features
| Colour | Gold |
|---|---|
| Model Part Number | 1513774 |
| Brand | Phoenix Contact |
Extended Product Information
FAQs
What is the maximum current and voltage rating for this connector?
This connector has a current rating of 2.0A and a voltage rating of 30V AC/DC.
What does IP67 mean for this connector?
IP67 signifies that the connector is protected against dust ingress and can withstand temporary immersion in water up to 1 meter for 30 minutes.
Can I use this connector with an M12 female receptacle?
Yes, this is a male M12 connector designed to mate with a corresponding female M12 receptacle.
What is the purpose of the PG9 thread?
The PG9 thread is a standardized metric thread used for mounting the connector directly onto equipment panels or enclosures, ensuring a secure fit.
What type of cable is included?
It comes with a 0.5-meter TPE (Thermoplastic Elastomer) litz wire, with 8 individual wires each of 0.25 mm² cross-section.
How thick can the panel be for front mounting?
This connector is designed for panel thicknesses of approximately 3 mm when front-mounted with the PG9 thread.
Is the cable length customizable?
The standard cable length for this specific model (1513774) is 0.5 meters. For different lengths, you would need to consider alternative product variants or custom solutions.
Troubleshooting
No signal from connected sensor
Verify all 8 wires are correctly connected to their respective terminals. Check for continuity on each wire using a multimeter. Ensure the mating connector is properly seated and locked.
Connector not mounting securely
Confirm that the mounting hole or thread is indeed PG9. Check for any debris or damage on the PG9 thread of the connector or the mounting surface.
Intermittent connection issues
Inspect the gold-plated contacts for damage or contamination. Ensure the mating connector is fully engaged and latched. Check the integrity of the pre-wired cable for breaks or kinks.
Connector seal compromised (IP rating lost)
Ensure the front mount gasket is correctly positioned and not damaged. Re-tighten the connector to achieve a snug fit against the mounting surface. Replace the connector if the seal is permanently damaged.
Pros and Cons
Pros
- Durable polymer housing and gold-plated contacts ensure long-term reliability.
- Pre-fabricated wiring simplifies installation and reduces setup time.
- IP67 rating offers excellent protection in demanding industrial environments.
- Standardized M12 connection is widely compatible with industrial automation equipment.
- Male connector type allows for direct integration into female receptacles.
Cons
- Fixed cable length of 0.5 m may not suit all installation requirements.
- PG9 mounting thread is specific and requires compatible mounting holes.
- Limited to 30V AC/DC, not suitable for high-power applications.
- Requires careful handling to maintain IP67 seal after installation.
Setup, Compatibility & Care
Setup:
- Ensure the mounting surface has a compatible PG9 thread or a suitable mounting hole (M8/M16 may require adapter).
- Carefully insert the connector into the mounting hole, ensuring the front mount gasket creates a seal.
- Screw the connector securely into place using the integrated thread. Avoid over-tightening.
- Connect the pre-wired single wires to the corresponding terminals on your device or control system, observing correct polarity.
Compatibility:
- Connector Type: M12, 8-pin, A-coded, Male.
- Mounting: Designed for PG9 threads; compatible with panel thicknesses around 3 mm.
- Voltage/Current: Suitable for systems operating up to 30V AC/DC and drawing up to 2.0A per contact.
Care:
- Clean the connector exterior with a dry or slightly damp cloth. Avoid harsh chemicals.
- Periodically inspect the connection for any signs of damage or wear.
- Ensure the mating connection is clean and free of debris before engagement to maintain the IP67 seal.