Manfrotto 131DD Accessory Arm - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Manfrotto 131DD Accessory Arm is designed for photographers and videographers who need to expand their tripod's capabilities by mounting multiple heads. Its key benefit is the ability to support up to four heads, offering significant versatility for complex setups. A minor caveat is its specific mounting requirement onto 3/8" columns. This aluminum arm provides 30.7cm of travel and features two positional head mounts on its side arm, making it an ideal accessory for detailed or multi-camera work.
All features
| Brand | Manfrotto |
|---|
Extended Product Information
FAQs
What is the main advantage of the 131DD over the 131D?
The 131DD features two positional head mounts on the side arm, allowing for the mounting of up to four heads in total, whereas the 131D typically supports fewer.
What is the maximum weight capacity?
The product information does not specify a maximum weight capacity. Users should ensure their tripod can support the combined weight of the arm, multiple heads, and attached equipment.
Can I mount three cameras directly on this arm?
Yes, you can mount one head on the central column attachment and two additional heads on the side arm mounts, for a total of three heads (and thus three cameras, assuming each head has a camera).
What is the material of the accessory arm?
The accessory arm is constructed from aluminum.
What is the weight of the Manfrotto 131DD?
The Manfrotto 131DD weighs 1.1 kg.
Does this arm come with tripod heads?
No, this product is an accessory arm only and does not include tripod heads. Heads must be purchased separately.
How much does the arm extend?
The arm offers 30.7cm of column travel.
Troubleshooting
Arm wobbles or feels unstable
Ensure the arm is fully and securely screwed onto the 3/8" thread of the tripod's center column. Check that the tripod itself is stable and not overloaded.
Cannot attach tripod heads
Verify that the tripod heads have a 3/8" mounting screw. If they have a 1/4" screw, you will need a 3/8" to 1/4" adapter (sold separately).
Difficulty mounting onto tripod column
Confirm that your tripod's center column has a 3/8" threaded stud. If it has a different size thread or no thread, this arm will not be directly compatible.
Pros and Cons
Pros
- Allows mounting of up to four tripod heads for maximum versatility.
- Durable and lightweight aluminum construction.
- Provides significant column travel for precise positioning.
- Securely mounts to standard 3/8" tripod columns.
- Ideal for complex multi-camera or accessory setups.
Cons
- Requires a 3/8" mounting thread on the tripod column.
- May add noticeable weight to smaller, lightweight tripods.
- Primarily designed for accessory mounting, not as a primary support.
- The two side mounts are fixed positions, offering less flexibility than articulating arms.
Setup, Compatibility & Care
Setup:
- Ensure your tripod's center column has a 3/8" threaded stud.
- Screw the Manfrotto 131DD Accessory Arm onto the 3/8" thread of your tripod's center column until it is securely tightened.
- Attach your desired tripod heads to the main mounting point and the two side mounts.
- Install your cameras or other accessories onto the respective heads.
Compatibility:
- Mounting Thread: Requires a 3/8" threaded stud on the tripod's center column. It is not compatible with 1/4" threads without an adapter (sold separately).
- Heads: Compatible with any tripod head that uses a standard 3/8" mounting screw.
Care:
- Wipe clean with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents.
- Periodically check the tightness of the arm on the tripod column.
- Store in a dry place to prevent corrosion.