Warhammer Colour Layer Paint - Dawnstone - 12ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Warhammer Colour Layer Paint in Dawnstone is designed for tabletop hobbyists and miniature painters who need a reliable mid-tone grey for highlighting plastic, metal, and resin models. This high-quality acrylic paint excels at building depth and creating smooth transitions over base coats, though its relatively thin consistency requires multiple coats for full, opaque coverage on dark surfaces.
All features
| Model Part Number | 9918995104906 |
|---|---|
| Brand | Warhammer Colour |
Extended Product Information
FAQs
Can I use Dawnstone as a base coat?
While it can be used, it is a layer paint and is thinner than base paints, meaning it will likely require three or more coats to achieve a solid color.
Does this paint require a primer?
Yes, for the best adhesion and durability, always prime your miniatures with a suitable model primer before applying any acrylic paint.
How should I clean my brushes after using this paint?
Rinse your brushes thoroughly with clean water until no paint residue comes off, then reshape the bristles and let them dry vertically.
Can I mix this paint with other colors?
Yes, Warhammer Layer paints are fully mixable with other acrylic paints in the range to create custom shades.
How long does the paint take to dry?
Thin layers typically dry to the touch within 5 to 10 minutes, depending on the ambient temperature and humidity.
Troubleshooting
Paint appears streaky or patchy during application
Ensure you are using thin coats and letting each layer dry completely before applying the next one.
Paint has separated or clumped inside the pot
Add a clean mixing ball to the pot and shake thoroughly for several minutes to re-emulsify the pigment.
Paint is drying on the brush tip too quickly
Thin the paint slightly with a drop of water or use a dedicated retarder medium to increase the working time.
Pros and Cons
Pros
- Smooth, even coverage when applied in thin layers
- Non-toxic, water-based formula is safe for long sessions
- Excellent for creating highlights on dark armor or stone textures
- Dries to a professional-looking matte finish
- Compatible with a wide variety of hobby miniature materials
Cons
- Requires multiple layers for full opacity
- Small 12ml pot size may deplete quickly for large projects
- Consistency can separate over time if not stored properly
- Not suitable as a primary base coat due to its translucent nature
Setup, Compatibility & Care
To begin, shake the pot vigorously to ensure the pigment is evenly mixed. If the paint appears too thick, add a drop of water or thinning medium to reach your desired consistency. When applying, use a high-quality synthetic or sable brush and work in thin, multiple coats to prevent obscuring fine details. Always clean your brushes immediately after use with warm water. For storage, ensure the lid is snapped tight to prevent the paint from drying out; keep it in a cool, dry place away from direct sunlight.