The MeacoDry Arete Pump is designed exclusively for the MeacoDry Arete® range, allowing you to automatically drain your dehumidifier's water to a sink, bath, or outside, so you don't have to empty the bucket by hand. This pump requires no expertise to set up and install, and everything has been made easy for you. It is compatible with the MeacoDry Arete® One and Arete® Two 18, 20, and 25L Dehumidifiers. If you are using your dehumidifier in a space where you cannot empty the tank daily, the pump ensures continuous operation by draining the water away, preventing the unit from stopping when the tank is full. The pump is powered by the dehumidifier itself, and a 3m hose with a 9mm internal diameter is included. Installation involves placing the pump in the bottom of the tank, attaching the hose, guiding the hose and power cable out of the left-hand side of the tank, plugging the power lead into the Arete® socket, and directing the hose to your desired drainage point. Once installed, the pump automatically activates whenever the tank is full. The MeacoDry Arete Pump can lift water away to a height of 2.5m and requires no tools for installation. Specifications: Automatically drains the MeacoDry Arete tank. Lifts water away to 2.5m height. Exclusively designed for the MeacoDry Arete 20 and 25L dehumidifiers. Runs off the dehumidifiers own internal power supply. No tools required for installation. Comes supplied with 3m of hose.