Frenchic Citrine Al Fresco - 750ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Citrine Al Fresco paint is ideal for DIY enthusiasts and homeowners looking for a durable, versatile, and attractive finish for both interior and exterior projects, especially furniture and woodwork. Its key benefit is its all-in-one formulation, acting as a self-primer and self-sealer, saving time and effort. A potential caveat is that while versatile, it is not recommended for very wet areas like shower surrounds.
All features
| Colour | Green |
|---|---|
| Model Part Number | 55774500782464 |
| Brand | Frenchic |
Extended Product Information
FAQs
How many coats of Frenchic Citrine Al Fresco are recommended?
For a long-lasting and durable finish, two coats are recommended. The paint does have excellent coverage, but two coats ensure maximum protection and colour depth.
Can I use this paint in a bathroom?
This paint is not recommended for very wet areas such as shower or bath surrounds. It is suitable for ceramic wall tiles in areas with less direct water exposure, like splashbacks in a kitchen or a powder room.
Do I need to use a primer before applying?
No, Frenchic Citrine Al Fresco is self-priming and self-sealing, meaning you can apply it directly to most prepared surfaces without a separate primer.
Is this paint safe for children's furniture?
Yes, the paint is EN71-3 certified, making it safe for use on children's toys and furniture.
How do I clean my painted surfaces?
Clean painted surfaces with a damp cloth. For tougher marks, use a mild soap solution and a soft cloth. Avoid abrasive cleaners and excessive scrubbing.
What is the coverage rate of the 750ml tin?
A 750ml tin will cover approximately 12.5m² with a single coat. With the recommended two coats, you can expect to cover approximately 6m².
Can I paint over existing gloss paint?
Yes, you can paint over existing gloss paint. For optimal adhesion, it is recommended to lightly sand the glossy surface to create a key for the paint to adhere to.
Troubleshooting
Paint is too thick or stringy
Stir the paint thoroughly. If it remains too thick, a tiny amount of water (no more than 5-10% by volume) can be added to achieve a better consistency, though this may slightly affect the finish. Ensure the paint has not been stored in freezing temperatures.
Poor adhesion or chipping
Ensure the surface was properly cleaned and dry before application. For very slick or glossy surfaces, a light sanding beforehand is recommended. Ensure at least two coats were applied for adequate durability.
Uneven finish or brush marks visible
Apply paint in thin, even coats using a good quality brush or roller. Avoid overworking the paint. Ensure you are using the recommended application technique for a matte finish. Allow adequate drying time between coats.
Surface remains tacky after drying
Ensure the paint has been applied in thin coats and in a well-ventilated area. Check the temperature and humidity, as extreme conditions can affect drying times. If still tacky after 24-48 hours, a very light buffing might help, or a second, thinner coat may be needed.
Pros and Cons
Pros
- Versatile application on numerous surfaces.
- Suitable for both indoor and outdoor use, offering great flexibility.
- Saves time with its self-priming and self-sealing properties.
- Durable and weatherproof finish for longevity.
- Safe for use on children's toys.
- Achieves a professional matte finish.
Cons
- Not recommended for very wet areas such as shower or bath surrounds.
- Coverage estimates require two coats for optimal durability.
- May require surface preparation on certain materials like laminate for best adhesion.
Setup, Compatibility & Care
Setup:
Ensure the surface to be painted is clean, dry, and free from grease or dust. For best results on very slick surfaces like laminate or previously painted glossy finishes, a light sand may be beneficial. Stir the paint thoroughly before use. No primer or sealant is typically required due to its self-priming and self-sealing properties.
Compatibility:
This multipurpose paint is suitable for:
- Furniture and woodwork
- Laminate
- Powder-coated radiators
- Metal
- uPVC
- Ceramic wall tiles (avoid very wet areas like showers/bath surrounds)
- Kitchen cupboards
- Front doors
- Interior wood and concrete floors
Care:
Allow the paint to cure fully before heavy use (typically 7-14 days for maximum hardness). Clean brushes and equipment immediately after use with water. For cleaning painted surfaces, use a damp cloth and mild soap if necessary. Avoid abrasive cleaners.
Coverage:
A 750ml tin covers approximately 12.5m² per coat. Two coats are recommended, meaning a 750ml tin covers approximately 6m² for a durable finish. A 250ml tin covers approximately 2m².