Deco Art Maxx Gloss Acrylic Paint - Purple Polish
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Deco Art Maxx Gloss Acrylic Paint in Purple Polish is designed for DIY enthusiasts and home decorators seeking a professional, ultra-high-gloss finish on furniture and decor. Its key benefit is achieving a glass-like sheen with a water-based, brush-on formula that requires no priming or sanding on most surfaces. A potential caveat is that achieving full coverage may require two coats, and the extended open time, while beneficial for leveling, requires mindful application.
All features
| Model Part Number | ADMG16-36 |
|---|---|
| Brand | DecoArt |
Extended Product Information
FAQs
Does this paint require a topcoat?
No, Deco Art Maxx Gloss Acrylic Paint is designed to be a durable, self-sealing finish once fully cured. No additional topcoat is typically needed.
How long does it take to fully cure?
While the paint may be dry to the touch within a few hours, full curing, which provides maximum hardness and chemical resistance, can take several days to a few weeks. Refer to the product packaging for specific cure times.
Can I mix Deco Art Maxx Gloss colors?
Yes, the colors in the Maxx Gloss line are intermixable, allowing you to create custom shades.
What surfaces can I use this paint on?
It adheres well to most smooth, coated surfaces, including previously painted or varnished items, sealed wood, metal, and some plastics. Always test on an inconspicuous area first for unknown surfaces.
Is this paint suitable for outdoor use?
The product information does not specify outdoor suitability. It is designed for furniture and home decor accessories and is fade-resistant. For outdoor projects, consider products specifically formulated for exterior environments.
How do I clean up spills or tools?
Clean brushes, tools, and any wet spills immediately with soap and water. Dried paint may be more difficult to remove.
How many coats are usually needed?
Full coverage is typically achieved in two coats, though this can vary depending on the surface color and the color of the paint being applied.
Troubleshooting
Paint is streaky or uneven
Ensure you are applying thin, even coats. Use a high-quality synthetic brush. The extended open time allows for smoothing, but overworking the paint can cause issues. Ensure consistent brush strokes.
Low gloss finish
Ensure the paint is stirred thoroughly before and during use. Apply a second coat if the first was too thin. The finish develops best once fully cured.
Paint is not adhering well
Confirm the surface is clean, dry, and free from oils or waxes. While no priming is usually needed, extremely slick or difficult surfaces might benefit from a light scuff or appropriate primer. Test adhesion in a small area.
Brush marks are visible
Utilize the extended open time to gently brush over any visible marks before the paint begins to set. Apply in thinner coats and use long, consistent strokes.
Pros and Cons
Pros
- Achieves an exceptionally high-gloss, glass-like finish.
- Water-based formula is easy to clean up.
- Does not require priming or sanding on many surfaces.
- Offers excellent adhesion to various existing finishes.
- Provides a durable, fade-resistant, and chemically resistant surface once cured.
- Intermixable to create custom colors.
Cons
- Full coverage often requires two coats.
- Extended open time can lead to accidental marks if not applied carefully.
- Adhesion may vary on certain non-standard surfaces.
- Curing time must be respected for full durability.
Setup, Compatibility & Care
Setup: Ensure your project surface is clean, dry, and free from dust or grease. For most smooth, coated surfaces, no priming or sanding is necessary. Stir the paint thoroughly before use to ensure even color and consistency.
Compatibility: This paint adheres well to most previously finished surfaces, including other paints, varnishes, and sealed wood. It is designed for use on furniture and home decor items. Test on an inconspicuous area first if unsure about surface compatibility.
Care: Clean brushes and tools immediately after use with soap and water. Once fully cured (allow several days to weeks as per manufacturer's guidance), the finish is durable and resistant to household cleaning chemicals. Wipe clean with a damp cloth and mild soap if necessary. Avoid abrasive cleaners or scrub pads, which can dull the gloss finish.