Connect Electrical Sensor To Suit Denso Injectors - 2 Piece Set
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Connect Electrical Sensor set is designed for automotive technicians and DIY enthusiasts working with Denso injectors. Its key benefit is providing a reliable replacement harness for faulty connectors, ensuring optimal injector performance. A potential caveat is its specific compatibility, requiring verification before purchase. This 2-piece set includes a 2.5m cable for each connector, acting as a direct replacement for worn or damaged electrical connections.
All features
| Model Part Number | 37564 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
What type of injectors is this connector designed for?
This electrical sensor connector is specifically designed to suit Denso injectors.
What is included in the 2-piece set?
The set includes two electrical sensor connectors, each with a 2.5m cable.
Can I use this with injectors other than Denso?
While compatible with some Delphi injector connector kits, it is primarily designed for Denso injectors. Verification of compatibility is recommended for non-Denso applications.
What is the length of the cable on each connector?
Each connector comes with a 2.5-meter (approximately 8.2 feet) cable.
Is this a genuine replacement part?
This is a replacement harness set from Connect, Part No: 37564, designed to replace original connectors for Denso injectors.
Do I need special tools to install this connector?
Basic automotive electrical tools such as wire strippers, crimpers, soldering iron (optional), and heat shrink tubing are typically needed for a secure installation.
Troubleshooting
Injector not firing after replacement
Double-check wire connections for correct polarity and ensure they are securely crimped or soldered. Verify the continuity of the new harness with a multimeter.
Intermittent performance issues
Inspect the connections for any signs of corrosion or loose fitting. Ensure the cable is routed away from heat sources and moving parts.
Connector does not fit the injector
Confirm that the injector is a Denso type and that this connector model (37564) is the correct replacement for your specific application. Refer to your vehicle's service manual.
Pros and Cons
Pros
- Ensures proper electrical connection for Denso injectors.
- Simplifies the replacement process for damaged connectors.
- Includes ample cable length for flexible installation.
- Offers a cost-effective solution compared to full injector replacement.
- Durable materials for longevity.
Cons
- Specific compatibility may require verification for non-Denso or certain Delphi systems.
- Requires basic automotive electrical knowledge for installation.
- Not a universal solution; must match the original connector type.
- Sold as a set, which might be more than needed for a single repair.
Setup, Compatibility & Care
Setup:
- Disconnect the vehicle's battery before beginning any electrical work.
- Carefully remove the old electrical connector from the Denso injector.
- Crimp or solder the wires of the new connector to the corresponding wires of the vehicle's harness, ensuring proper polarity.
- Secure the connections using appropriate insulation (e.g., heat shrink tubing).
- Connect the new sensor harness to the Denso injector.
- Reconnect the vehicle's battery.
Compatibility:
This set is designed to suit Denso Injectors and is compatible with assorted Delphi and Denso Injector Connector Kits. Always verify the original injector connector type and the part number (Connect 37564) against your vehicle's specifications before purchasing.
Care:
Handle the connectors and wires with care to avoid damage. Keep connections clean and free from excessive moisture or contaminants. Regularly inspect electrical connections as part of routine vehicle maintenance.