Air Compressor Gun with Gauge - 116 PSI, 1/4" Coupling, 450mm Hose
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This heavy-duty tire inflating air gun is designed for DIYers, mechanics, and automotive enthusiasts seeking accurate and efficient tire inflation for cars, motorcycles, and bicycles. Its key benefit is the built-in pressure gauge for precise inflation control, with a potential caveat being the need for a compatible air compressor. It features a robust metal adapter, a comfortable ergonomic handle, and a 450mm hose for extended reach.
All features
| Model Part Number | AG4R758 |
|---|---|
| Brand | B2C |
Extended Product Information
FAQs
What type of air compressor do I need?
You need an air compressor with a standard 1/4" air outlet fitting. The compressor's CFM and PSI rating should be adequate for your inflation needs.
How accurate is the built-in pressure gauge?
The gauge provides real-time readings for precise inflation. For critical applications, it's always a good practice to double-check with a separate, calibrated gauge periodically.
Can this be used for truck tires?
While it has a maximum pressure of 116 PSI, which might be sufficient for some smaller truck tires, it is primarily designed for car, motorcycle, and bicycle tires. Check the specific pressure requirements for your truck tires.
What maintenance is required?
Minimal maintenance is needed. Keep the tool clean and dry, and store it properly. Periodically inspect the hose and connections for wear.
Is the hose replaceable?
The hose is permanently attached to the gun. If the hose is damaged, the entire unit may need to be replaced.
What is the warranty period?
Please refer to the product packaging or manufacturer's website for specific warranty information, as it typically varies by retailer and region.
Troubleshooting
Air leaks from the coupling
Ensure the 1/4" coupling is fully and securely attached to the compressor hose. Check the O-ring or seal on the coupling for damage and replace if necessary.
Gauge is not reading pressure
Verify that the air compressor is running and supplying air. Check that the air gun is properly connected and the valve on the tire is being engaged. Ensure the gauge is not blocked.
Difficulty connecting to tire valve
Ensure the metal adapter tip is aligned straight with the valve stem before pressing down. For some recessed valves, a longer or angled adapter may be needed, which is not included with this model.
Low inflation rate
Check the air compressor's output pressure and flow rate. Ensure there are no kinks or blockages in the air hose. Confirm the tire valve is functioning correctly.
Pros and Cons
Pros
- Accurate tire pressure monitoring with the built-in gauge.
- Durable construction for long-lasting performance.
- Comfortable handling due to the ergonomic grip.
- Versatile for various vehicle types (cars, motorcycles, bicycles).
- Easy and quick connection to air compressors via the 1/4" coupling.
Cons
- Requires a separate air compressor to operate.
- The metal adapter tip may be less suitable for tires with recessed valve stems.
- Pressure gauge accuracy can depend on calibration and external temperature.
- Hose length may be insufficient for very large vehicles or hard-to-reach tires in specific configurations.
Setup, Compatibility & Care
Setup:
- Ensure your air compressor is turned off and disconnected from power.
- Connect the 1/4" quick-release coupling on the air gun hose to the air compressor's air outlet.
- Verify that the connection is secure.
- Turn on your air compressor.
Compatibility:
- Requires an air compressor with a standard 1/4" air hose connection.
- Suitable for inflating tires on cars, motorcycles, bicycles, and other vehicles with standard Schrader valves.
- Maximum operating pressure is 116 PSI (8 Bar). Do not exceed this limit.
Care:
- After each use, release any residual air pressure.
- Wipe down the air gun with a dry or slightly damp cloth to remove dust and debris. Avoid using solvents.
- Store in a dry place, away from extreme temperatures and direct sunlight.
- Periodically check the hose for cracks or damage and the coupling for secure fit.