Gorilla Grab Adhesive - White - 80ml - 2 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Gorilla Grab Adhesive is a professional-grade bonding agent ideal for DIY enthusiasts and construction professionals who require an immediate, heavy-duty bond for home repairs or installation projects. It offers the key benefit of eliminating the need for mechanical fasteners like nails or screws, providing a clean and efficient assembly experience. While highly versatile, users should note that the adhesive requires proper surface preparation to reach maximum shear strength, and it is not suitable for applications requiring structural load-bearing flexibility.
All features
| Colour | White |
|---|---|
| Brand | Gorilla |
Extended Product Information
FAQs
Is Gorilla Grab Adhesive safe to use on plastics?
It is designed for wood, metal, concrete, and ceramics. It may not bond well to certain low-surface-energy plastics like polyethylene or polypropylene.
How long does it take for the adhesive to fully cure?
While the initial grab is immediate, the adhesive typically achieves full cure strength within 24 to 48 hours depending on temperature and humidity.
Can this be painted after it dries?
Yes, once the adhesive is fully cured, it can be painted over to match your project's aesthetic.
Is this product heat resistant?
It is intended for standard environmental temperatures; it is not recommended for use in high-heat areas like inside an oven or on active fireplace surfaces.
Can I use this underwater?
While it is waterproof, it is not designed to be applied directly underwater. The surfaces must be dry during the initial application for the bond to set.
Troubleshooting
Adhesive is difficult to squeeze out of the tube
Ensure the nozzle is not clogged by dried material; if it is, trim the tip back slightly to clear the opening.
Bond is not holding after application
Verify that surfaces were clean and free of dust, oils, or moisture before application; re-apply if the contact area was contaminated.
Adhesive spilled on unwanted areas
Wipe away excess adhesive immediately with a dry cloth or use mineral spirits if the adhesive has not fully cured.
Pros and Cons
Pros
- High initial tack reduces clamping time
- Waterproof formula suitable for outdoor use
- Bonds a wide variety of dissimilar materials
- Eliminates need for drills, nails, or screws
Cons
- Permanent bond makes disassembly difficult
- Requires clean, dust-free surfaces to function
- Not intended for structural load-bearing joints
Setup, Compatibility & Care
To achieve the best results, ensure both surfaces are clean, dry, and free of grease or loose debris. Apply the adhesive to one of the surfaces in a zigzag pattern or continuous bead. Firmly press the objects together immediately after application. For heavy items, apply enough pressure to ensure full contact across the bond line. Store the tubes in a cool, dry place with the cap tightly sealed to prevent the product from curing inside the nozzle. If the nozzle becomes clogged, you can trim the tip slightly to restore flow.